My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1871-1880 of 2658

Set Descending Direction
per page
  1. March Pumps

    March MAG Pump

    AC-1A-MD-3/8 115V

    15% Off Special Price $232.37 Regular Price $273.38

    Small but versatile, March Series 1 pumps can deliver a minimum of 1.7 GPM (7 LPM) up to 3.0 GPM (9 LPM). All Series 1 pumps are capable of serving applications with a maximum head of 4.5 ft. (1.3m) at zero GPM (0 LPM). Applications include pho...

    ac-1 Learn More
  2. Hypro Pumps

    316SS pump 1.5HP

    COMSV553

    $1,803.31

    316 SS pump. 1.5HP. 

    FEATURES: Open (semi) impellers

    Drain plug

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors available...

    1.5HP 230/460v ODP Learn More
  3. March Pumps

    March MAG Pump

    AC-1A-MD-1/2 115V

    15% Off Special Price $229.50 Regular Price $270.00

    Small but versatile, March Series 1 pumps can deliver a minimum of 1.7 GPM (7 LPM) up to 3.0 GPM (9 LPM). All Series 1 pumps are capable of serving applications with a maximum head of 4.5 ft. (1.3m) at zero GPM (0 LPM).  Maximum recommended fluid ...

    ac-1 Learn More
  4. March Pumps

    March MAG Pump

    AC-1C-MD 115V

    15% Off Special Price $229.50 Regular Price $270.00

    Small but versatile, March Series 1 pumps can deliver a minimum of 1.7 GPM (7 LPM) up to 3.0 GPM (9 LPM). All Series 1 pumps are capable of serving applications with a maximum head of 4.5 ft. (1.3m) at zero GPM (0 LPM). Applications include photog...

  5. March Pumps

    Submersible or Open air March pump

    1A-MD-1/2 115V

    15% Off Special Price $325.13 Regular Price $382.50

    March pump.

    Small but versatile, March Series 1 pumps can deliver a minimum of 1.7 GPM (7 LPM) up to 3.0 GPM (9 LPM). All Series 1 pumps are capable of serving applications with a maximum head of 4.5 ft. (1.3m) at zero GPM (0 LPM). Applications i...

    115v Learn More
  6. Pedrollo Pumps

    Clear water pump

    PK03C16S

    $279.58

    Turbine Pump, Peripheral pump, clear water pump. 230v/1

    This pump is obsolete with the only comprable replacements being PK03A16S (115v) or CT series with side / lateral suction (from side).

    They are recommended for pumping clean water without a...

    OBSOLETE see PK03A16S Learn More
  7. Little Giant Pumps

    5-MD

    583002

    $813.41
    Magnetic Drive Pump 115V, 6' Power Cord, 3-Prong Plug
  8. Hypro Pumps

    316SS pump 1.5HP

    COMSV55T

    $1,968.58

    centrifugal pump 316 SS investment cast end-suction. 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors available as a option...

    1.5HP 115/230v TEFC Learn More
  9. Little Giant Pumps

    5-MD-HC

    583603

    $944.21
    The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute, magnet housing and impeller are glass-filled Ryton for excellent chemical resistance. Ceramic shaft and thrus...
  10. Tsurumi

    Gas powered Dewatering pump

    TE3-80HA

    $883.00
    Gas powered Dewatering pump. Heavy-duty Honda GX160 gas engine powered with oil sensor and Silicon Carbide mechanical seal provides the longest life in this class dewatering pump. 15840 GPH.

    Durable Rolled-Steel frame provides pump / engine with ...

View as List Grid

Items 1871-1880 of 2658

Set Descending Direction
per page