My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 381-390 of 872

Set Descending Direction
per page
  1. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-15MT

    $11,620.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  2. AMT Pumps

    Self Priming Centrifugal Pump

    285H-95

    20% Off Special Price $823.65 Regular Price $1,029.56

    1.5HP AMT Self-priming Cast Iron pump 285H-95

    Heavy duty cast iron construction designed for circulating, boosting, washdown, liquid transfer and dewatering applications. The centerline discharge feature is specifically designed to prevent vapor ...

    1.5HP 115/230v TEFC Learn More
  3. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5495-98

    25% Off Special Price $894.10 Regular Price $1,192.13
    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiri...
    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contaminant free pumping. Learn More
  4. Pacer Pumps

    SE3LL C5.0C

    58-13L4 C5.0C

    15% Off Special Price $2,507.05 Regular Price $2,949.47
    S pump close coupled to a TEFC 115 / 230 /1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications.
  5. Pacer Pumps

    SY2HLN D3.0C-LN

    58-32H88-D3.0C

    $3,198.15
    S pump close coupled to a TEFC 3 HP 230V/460v electric motor. Self priming Ryton PPS plastic resists abrasive particles, good for many mild chemical and most water transfer applications. Non metalic internals. No wetted metal parts. Used often as...
  6. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5497-98

    20% Off Special Price $953.70 Regular Price $1,192.13
    AMT Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contamina...
    3HP 230/460v TEFC Learn More
  7. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-20M

    $10,420.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    20HP Learn More
  8. Pacer Pumps

    SE11/2AL-G.10C

    58-11A4-G.1.0C

    $949.90
    S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications, de-icing solutions like calcium chloride, fountains, irrigation and de-watering. Se...
    1hp ,115/230v Learn More
  9. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-15MT

    $11,620.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  10. Pacer Pumps

    ISPE2GL D3.0C

    58-52G4D3.0C

    $2,430.60

    Self-Priming SS Centrifugal Pumps, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps include a built-in check valve.

    These pumps are standard for mobile shower o...

    3HP 230/460v/3 Stainless 2" Learn More
View as List Grid

Items 381-390 of 872

Set Descending Direction
per page