My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 875

Set Descending Direction
per page
Page
  1. Finish Thompson DB10V-M207 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10V-M207
    $1,854.65
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • PVDF construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation with IEC m...
    1.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  2. Barmesa 62070062 IB1.5-5-2-1 Center Line Discharge

    Barmesa Pumps

    IB1.5-5-2-1 Center Line Discharge

    62071062
    $2,648.00

    High head, Center Line Discharge End-Suction Centrifugal Pump. Impeller trims are available, see performance chart.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chille...

    5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson FTI DB8 kynar PVDF pump

    Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8V-M227
    $2,095.30
    FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...
    1/2HP 230/460v TEFC Kynar Learn More
    Add to Wish List Add to Compare
  4. fti_db7_1.jpg

    Finish Thompson Pumps (FTI)

    FTI DB7 pump

    DB7P-M226
    $1,605.40

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, ...

    1/2HP 115/230v PolyPro Learn More
    Add to Wish List Add to Compare
  5. Barmesa - 62070025: IB2-3-2 Center Line Discharge pump

    Barmesa Pumps

    IB2-5-2 Center Line Discharge pump

    IB2-5-2
    $2,082.00

    Center Line Discharge End-Suction Centrifugal Pump.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. Top centerline discharge similar to many ANS...

    5HP 230/460v Learn More
    Add to Wish List Add to Compare
  6. FTI pump DB5.5P-m

    Finish Thompson Pumps (FTI)

    DB5.5 Magnetic pump Polypro

    DB5.5P-M615
    $588.78
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    Metric motor 50/60 Hz TEFC 1/4 Hp (0.19 kW) 230V, 1 Ph, Learn More
    Add to Wish List Add to Compare
  7. barmesa iC1 high head centrifugal pump 5hp

    Barmesa Pumps

    5HP High Pressure Pump

    62070515
    $1,991.00

    Commercial-Duty Cast Iron Pump for High-Pressure Water Applications

    The Barmesa 62070515 is a 5 HP high head, end-suction centrifugal pump built for commercial-duty use. Featuring rugged all-cast iron construction, this pump is engineered for hig...

    5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  8. Barmesa 62071008 IB1.5-7-5-2 Center Line Discharge

    Barmesa Pumps

    IB1.5-7-5-2 Center Line Discharge

    62071008
    $2,291.00

    High head, Center Line Discharge End-Suction Centrifugal Pump. Impeller trims are available, see performance chart.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chille...

    7.5HP 230/460v/3 Learn More
    Add to Wish List Add to Compare
  9. 62071047 Centerline discharge end suction Barmesa_IB pump 10HP

    Barmesa Pumps

    IB2.5-15-2 Center Line Discharge

    62071048
    $3,730.00

    Center Line Discharge End-Suction Centrifugal Pump. IB21/2

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. For process applications, dewatering,...

    15HP 230/460v 3" Learn More
    Add to Wish List Add to Compare
  10. 62071047 Centerline discharge end suction Barmesa_IB pump 10HP

    Barmesa Pumps

    IB2.5-7.5-2 Center Line Discharge

    62071046
    $2,440.00

    Center Line Discharge End-Suction Centrifugal Pump. IB21/2

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. For process applications, dewatering,...

    7.5HP 230/460v 3" Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 875

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Motor TEFC Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 747 items
  2. Magnetic Coupled (Seal-less) Pumps 125 items
Phase (Ø)
  1. Single (1) 261 items
  2. Three (3) 433 items
Voltage (Range)
  1. 110-120 37 items
  2. 208-230/460//190-220/380-415 10 items
  3. 208-240 7 items
  4. 220-240/460-480 339 items
  5. 110-120/220-240 212 items
  6. 220-240 73 items
  7. 208-240/460 159 items
  8. 230/460 1 item
  9. 460-480 2 items
  10. 12/24/36 VDC 13 items
Horse Power (HP)
  1. 1/4 3 items
  2. 1/3 17 items
  3. 1/2 83 items
  4. 2/3 1 item
  5. 3/4 96 items
  6. 1 93 items
  7. 1 1/2 111 items
  8. 2 111 items
  9. 3 127 items
  10. 5 84 items
  11. 7 1/2 53 items
  12. 10 27 items
  13. 15 14 items
  14. 20 7 items
  15. 25 2 items
  16. 30 1 item
inlet size
  1. Less than 1in 72 items
  2. 1in 83 items
  3. 1 ¼" 167 items
  4. 1 ½" 163 items
  5. 2in 214 items
  6. 2 ½" 1 item
  7. 3" 58 items
  8. 4" 10 items
PRICE $
$  -  $
Manufacturer
  1. American Stainless 67 items
  2. AMT Pumps 170 items
  3. Barmesa Pumps 11 items
  4. Calpeda Pumps 4 items
  5. EBARA Pumps 31 items
  6. Finish Thompson Pumps (FTI) 88 items
  7. Flotec Pumps 3 items
  8. General Pump 1 item
  9. Gorman-Rupp Pumps 2 items
  10. Griswold Pumps 13 items
  11. Hypro Pumps 44 items
  12. Jabsco Pumps 1 item
  13. Little Giant Pumps 10 items
  14. March Pumps 41 items
  15. MP Pumps 105 items
  16. MTH Pumps 76 items
  17. Myers Pumps 7 items
  18. Oberdorfer Pumps 33 items
  19. Pacer Pumps 43 items
  20. Pearl Calpeda Pumps 3 items
  21. Pedrollo Pumps 37 items
  22. RS Corcoran 5 items
  23. Serfilco 57 items
  24. Wayne 1 item
  25. Webtrol 22 items