My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 101-110 of 211

Set Descending Direction
per page
  1. MP Pumps

    High Head Pump & Motor HHLF

    36438

    $5,675.00

    High head self priming centrifugal pump, close coupled to an electric motor.

    • 1 1/2 x 1 1/2" HIGH HEAD
    • FLOWS - TO 140 GPM
    • PRESSURES - TO 190 TDH
    • CAST IRON CONSTRUCTION
    • DRIVE SLEEVE - 304 STAINLESS STEEL
    • Close Coupled Motor
    • SEALS - STANDARD...
    5HP 230v/1ph Learn More
  2. MP Pumps

    FM8 SS Self Priming Pump w/ Motor

    38333

    $5,212.50
    FM8 Flomax 8 stainless steel pumps are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 3HP.The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applicatio...
    3HP 230/460v SS Learn More
  3. MP Pumps

    Honda Stainless Self Priming Flomax 8

    36764

    $6,077.50
    Honda Electric Start w/ Stainless Steel self priming pump.

    Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda. 316SS gas semi-trash pumps. 

    Standard features include a 2″ NPT ...

    5HP ES Honda Stainless Learn More
  4. MP Pumps

    Series 200 pump

    22737

    $3,712.50
    Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizontal. ...
    5HP 230/460v Learn More
  5. MP Pumps

    Series 200 pump

    35804

    $7,042.75
    Bronze Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizonta...
    7.5HP 230/460v Learn More
  6. MP Pumps

    Stainless Steel FM 8 w/ 2HP Motor

    33818

    $5,175.00
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled SS
  7. MP Pumps

    Flomax 15 FM15 Pump HDD

    33578

    $3,837.50

    Bentonite HDD replacement pump, SIMILIAR to Ditch Witch Vermeer pump. Pump kit Flomax 15 are self-priming pumps, pipe size 3" NPT. For close coupling to standard 1" shaft engine. See other models for other mounts, or driver options. see flow curve...

    Charged grease Dbl seal Learn More
  8. MP Pumps

    FM 10 w/ 5HP Motor

    24389

    $4,685.00

    Flomax® 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using TEFC Electric Motor 5 HP.  Includes base plate.

    FLOMAX® 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...

    Cast Iron 5HP 230/3phase 2" Learn More
  9. MP Pumps

    FM 10 w/ 5HP Motor

    28604

    $6,012.50

    Flomax® 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using TEFC Electric Motor 5 HP.  Includes base plate.

    FLOMAX® 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from height...

    Cast Iron FM10 5HP 230/1phase 2" Learn More
  10. MP Pumps

    FM40 w/ 25HP

    FM40-25

    $19,936.25
    FLOMAX® 40 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction ...
    25HP Learn More
View as List Grid

Items 101-110 of 211

Set Descending Direction
per page