Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2XPKS Electric Self-Priming Pump
B51501
$4,428.00The type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and irriga...
3HP, 1phase Learn More -
Berkeley Pumps
B3TPMS Centrifugal Water Pump 10HP/1ph
B54651
$8,662.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool and other water transfer applictions.10HP/1ph Learn More -
Berkeley Pumps
B2ZPLS Centrifugal Water Pump 20hp
B74492
$7,830.14BERKELEY Close-Coupled high head Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller without distur...230/460v/3 20HP 2-1/2"x2" Flange Learn More -
Berkeley Pumps
B2‐1/2JRMBMS Water Pump Frame mount
B73402
$7,682.51Berkeley Hydraulic drive Type B frame mount (customer supplied hydraulic motor) pumps are designed for the user who has a separate power source suitable for driving through SAE hydraulic motor. Water trucks are typical. Ideal for general purpose ...Hyd Frame mount CW Learn More -
Berkeley Pumps
B2TPM Berkeley Water Pump
B53766
$6,812.00Berkeley Water Pump. End suction centrifugal pump, close coupled with packing. Water pump for irrigation, water transfer, industrial applications.5hp 230v/1 packed Learn More -
Berkeley Pumps
B2-1/2ZRL Centrifugal Water Pump Frame mount
B74966
$4,609.00Berkeley Type B frame mount pumps, Made in USA are designed for the user who has a separate power source suitable for driving through couplings or with belts. Water trucks and tenders, pile jetting are typical applications. B2-1/2ZRL B74966 is I...Packing NPT CW Learn More -
Berkeley Pumps
B2TPM Berkeley Water Pump
B53767
$7,760.00Berkeley Water Pump. End suction centrifugal pump, close coupled with packing. Water pump for irrigation, water transfer, industrial applications.7.5hp 230v/1 packed Learn More -
Berkeley Pumps
B2-1/2TPMS Berkeley Water Pump
B54650
$8,533.00Berkeley water pump B54650 B21/2TPMS
End suction centrifugal pump, close coupled with mechanical seal and NPT connections. Used for irrigation, fire sprinkler, boosting and general commercial water applications.
BERKELEY Close-Coupled End-Suctio...
10HP single phase Learn More -
Berkeley Pumps
B2-1/2TPMS Berkeley Water Pump
B75980
$7,139.00Berkley centrifugal pump, End suction centrifugal pump, close coupled with mechanical seal and Flanged connections. Used for irrigation, fire sprinkler, boosting and general commercial water applications. 125# flat face flanges.BERKELEY Close...
10HP 3 phase ODP Learn More -
Berkeley Pumps
B3TPMS Centrifugal Pump 1.5HP/1ph
B54586
$5,214.00Berkeley B3TPMS pump B54586
The type B, pumps are built for continuous dependable performance and ease of repair. Ideal for transfer applications, standby fire protection, dewatering and irrigation. Flows to 550 GPM, Heads to 180 feet.
-
Flows...1.5HP Learn More
-
