My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 51-60 of 101

Set Descending Direction
per page
  1. Hypro Pumps

    316SS pump .3HP

    COMSV11

    $1,073.36
    Close-Coupled Centrifugal Pump, 316 SS investment cast end-suction pump. Producing High flow rates, under low-head conditions. Designed for continous low-pressure circulatioon and transfer of non-flammable liquids, utility, boiler feed, general...
    1/3HP 115/230v Learn More
  2. Hypro Pumps

    316SS pump .5HP

    COMSV123T

    $1,145.77

    316 SS investment cast end-suction centrifugal pump by Hypro Shertech. This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors avail...

    230/460v TEFC 1/2HP Learn More
  3. Hypro Pumps

    316SS pump .5HP

    COMSV22

    $2,180.86

    316 SS investment cast end-suction centrifugal pump. 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors available as a option...

    1/2HP 115/230v Learn More
  4. Hypro Pumps

    Jockey Pump

    CSMSV8X

    $3,204.59
    SHURflo self-priming close-coupled cast iron, bronze or 316 stainless steel pumps produce high flow rates under low headconditions. Designed for continuous low pressure circulation and transfer of non-flammable liquids, water circulation,irrigati...
    Pump End Only Learn More
  5. Hypro Pumps

    Corrosion Resistant Noryl pump

    CHMNA243T

    $3,417.95

    Corrosion Resitant Noryl Centrifugal pumps. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and wastetreatment. All pumps include a 1/4" NPT drain plug.

    Pumps include a unique water flush port and plug for flushing the mec...

    1Hp 230/460 TEFC Learn More
  6. Hypro Pumps

    316SS pump .5HP

    COMSV223

    $1,251.36

    1/2hp centrifugal pump, 316 SS investment cast end-suction. Three phase industrial motor driven. For pumping and general transfer of industrial chemicals, soaps, solvents. 

    This series of low pressure general transfer pumps are also available in ...

    1/2HP 230/460v/3 Learn More
  7. Hypro Pumps

    316SS pump .75HP

    COMSV233T

    $2,222.52

    316 SS investment cast end-suction centrifugal pump 3/4HP.  

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors available as a...

    3/4HP 230/460v TEFC Learn More
  8. Hypro Pumps

    316SS pump .75HP

    COMSV23T

    $2,218.36

    3/4hp 316 SS investment cast end-suction centrifugal pump.

    FEATURES: Open (semi) impellers Passivated and electropolished 

    Drain plug 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and...

    3/4HP 230/460v TEFC Learn More
  9. Hypro COMSV33 316SS pump 3/4HP
    Sale

    Hypro Pumps

    316SS pump 3/4HP

    COMSV33

    57% Off Special Price $952.00 Regular Price $2,232.00

    316 Stainless Steel 3/4HP end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer.

    FEATURES: Open (semi) impellers Passivated and electropolished 

    Drain plug

    This series ...

    115/230v/1 ODP 3/4HP Learn More
  10. Hypro Pumps

    316SS pump 1.5HP

    COMSV453T

    $2,278.87

    1.5HP three phase electric 316 SScast end-suction centrifugal pump. 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors availa...

    1.5HP 230/460v TEFC Learn More
View as List Grid

Items 51-60 of 101

Set Descending Direction
per page