My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 41-50 of 101

Set Descending Direction
per page
Page
  1. Hypro 9008C-O PTO Drive Polypro pump

    Hypro Pumps

    PTO Drive Polypro pump

    9008C-O
    $4,398.00
    Cast iron pump with oil lubricated grear drive and 1 3/8" 1000 rpm female PTO hub with locking collar and mounting clip. Clips pump to PTO sheild of most tractors.
    Learn More
    Add to Wish List Add to Compare
  2. Turbine pump

    Hypro Pumps

    Turbine pump

    TXMBB13T
    $2,240.57

    Features • Direct Drive • Max. flow: 100 gpm • Max. pressure: 100 psi (Shut off) • Max. speed: 1000 rpm • Shaft: 15/16" stainless steel with 1/4" keyway • Port sizes: 1-1/2" NPT inlet, 1-1/2" NPT outlet • Max. fluid temperature: 140ºF • Housing: ...

    Learn More
    Add to Wish List Add to Compare
  3. Hypro TMBB25 Turbine Pump

    Hypro Pumps

    Turbine Pump

    TMBB25
    $3,391.33
    Turbine pump
    Learn More
    Add to Wish List Add to Compare
  4. Hypro CHMCV67 High Head Pump Centrifugal

    Hypro Pumps

    High Head Pump Centrifugal

    CHMCV67
    $3,600.86
    Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains,...

    3HP 230/1 Cast Iron Learn More
    Add to Wish List Add to Compare
  5. Hypro CHMCV56 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMCV56
    $3,238.88
    Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains,...

    Learn More
    Add to Wish List Add to Compare
  6. Hypro CHMBV453 Bronze Pump High Head Pump

    Hypro Pumps

    High Head Pump

    CHMBV453
    $4,804.96
    Bronze High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, bo...

    Learn More
    Add to Wish List Add to Compare
  7. Hypro CHMSV56 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMSV56
    $4,294.38
    316SS High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, ...

    Learn More
    Add to Wish List Add to Compare
  8. Hypro CHMBV56 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMBV56
    $5,258.41
    Bronze High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, bo...

    Learn More
    Add to Wish List Add to Compare
  9. shertech Hypro - CHMCV463T: High Head Pump

    Hypro Pumps

    High Head Pump 2hp

    CHMCV463T
    $3,948.07

    Cast Iron High Head Centrifugal Pump 2hp.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountai...

    2HP 230/460/3 TEFC Cast Iron Learn More
    Add to Wish List Add to Compare
  10. shertech Hypro - CHMCV353T: High Head Pump

    Hypro Pumps

    High Head Pump

    CHMCV353T
    $4,758.10

    Cast Iron High Head Centrifugal Pump 1.5hp.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fount...

    1.5HP 230/460/3 TEFC Cast Iron Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 41-50 of 101

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Manufacturer Hypro Pumps Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 37 items
  2. Three (3) 35 items
Voltage (Range)
  1. 208-240 1 item
  2. 220-240/460-480 8 items
  3. 110-120/220-240 35 items
  4. 220-240 1 item
  5. 208-240/460 27 items
  6. 12/24/36 VDC 4 items
Horse Power (HP)
  1. 1/3 3 items
  2. 1/2 12 items
  3. 3/4 9 items
  4. 1 10 items
  5. 1 1/2 11 items
  6. 2 14 items
  7. 3 9 items
inlet size
  1. Less than 1in 3 items
  2. 1in 5 items
  3. 1 ¼" 21 items
  4. 1 ½" 56 items
  5. 2in 3 items
PRICE $
$  -  $
Motor
  1. ODP 28 items
  2. PTO 9 items
  3. TEFC 44 items
  4. TENV 5 items