My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 129

Set Descending Direction
per page
Page
  1. 282K-95_8.gif

    AMT Pumps

    Cast Iron Self priming 6000GPH

    2821-95
    $1,000.88
    Cast Iron Self priming. This line of AMT Self-priming semi-trash Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-clean...
    115/230v 1-1/2HP ODP Learn More
    Add to Wish List Add to Compare
  2. AMT 2762-95 Electric pump Self Priming Electric pump

    AMT Pumps

    CI Self Priming Electric Centrifugal

    2762-95
    $1,092.25
    Electric pump. Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. IPT Electric pumps feature self-cleaning clog resistant impeller ca...
    Learn More
    Add to Wish List Add to Compare
  3. 2875-95_7.gif

    AMT Pumps

    3" CI Self-Prime pump Dewatering

    2879-95
    $3,942.94
    Cast Iron CI AMT self-priming pumps are heavy duty dewatering pumps designed for a broad range of high capacity applications. The Centerline discharge is specifically designed to prevent vapor binding and makes for more convenient piping connec...
    7.5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  4. AMT - 2761-95 self priming pump

    AMT Pumps

    AMT Self Priming Centrifugal pump

    2761-95
    $1,205.94
    Self-priming AMT IPT Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handl...
    115/230v 2HP ODP 7 500 GPH 2" Learn More
    Add to Wish List Add to Compare
  5. 490D-98_20.gif

    AMT Pumps

    High Pressure Cast Iron Centrifugal Pump

    4901-95
    $1,071.00

    High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure bo...

    208-230/460v 3HP ODP - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
    Add to Wish List Add to Compare
  6. 490D-98_5.gif

    AMT Pumps

    Stainless Steel Centrifugal Pump

    4902-98
    $1,377.00
    The straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid transfer, cooling, sprinkler/fire protection systems & pre...
    115/230v 1-1/2HP ODP - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
    Add to Wish List Add to Compare
  7. 489d AMT centrifugal high head pump

    AMT Pumps

    High Pressure Stainless Steel Centrifugal Pump

    489D-98
    $1,340.88

    AMT 316SS High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general chemical / solvent service. Series 48 inlet & outlet are 1.25" & 1" while series 49 is 1.50" & 1.25 respectively. See Curve "A"

    Optional Silico...

    230/460v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  8. amt stainless steel pump 489c-98

    AMT Pumps

    High Pressure Stainless Steel Centrifugal Pump

    489C-98
    $1,344.06

    High Head 316SS Centrifugal Pump. Designed for continuous duty, high pressure, high flow, chemical & general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled wa...

    115/230v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  9. 1.5HP 230/460v AMT IPT ss pump and motor

    AMT Pumps

    High Pressure Stainless Steel Centrifugal Pump

    489A-98
    $1,851.50

    High Head 316 stainless steel Pump. OBSOLETE, parts available. See 503x- 5020- models. Designed for continuous duty, chemical, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels...

    115/230v 1-1/2HP , call or email for alternative assistance. Parts still available. Learn More
    Add to Wish List Add to Compare
  10. AMT ipt 489b-98 Stainless Steel Centrifugal Pump

    AMT Pumps

    Stainless Steel Centrifugal Pump 3 phase

    489B-98
    $1,476.88

    Stainless Steel High Head Centrifugal Pumps. OBS see alternates. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation...

    230/460v 1-1/2HP TEFC - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 129

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Manufacturer AMT Pumps Remove This Item
  2. Motor ODP Remove This Item
Clear All
Shopping Options
Voltage (Range)
  1. 110-120 3 items
  2. 208-240 1 item
  3. 220-240/460-480 24 items
  4. 110-120/220-240 49 items
  5. 220-240 17 items
  6. 208-240/460 6 items
  7. 460-480 4 items
  8. 12/24/36 VDC 2 items
Horse Power (HP)
  1. 1/4 1 item
  2. 1/3 3 items
  3. 1/2 10 items
  4. 3/4 14 items
  5. 1 16 items
  6. 1 1/2 19 items
  7. 2 24 items
  8. 2 1/2 1 item
  9. 3 15 items
  10. 4 2 items
  11. 5 6 items
  12. 7 1 item
  13. 7 1/2 3 items
  14. 8 1 item
  15. 10 2 items
inlet size
  1. Less than 1in 2 items
  2. 1in 14 items
  3. 1 ¼" 24 items
  4. 1 ½" 44 items
  5. 2in 23 items
  6. 3" 7 items
  7. 6" 4 items
PRICE $
$  -  $