My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 131-140 of 236

Set Descending Direction
per page
  1. Little Giant Pumps

    2-MD Magnetic pump

    580012

    $423.74
    Magnetic Drive Pump 230V, 6' Power Cord, No Plug. Little Giant magnetic pump for water service and mild solution chemical transfer.
  2. Oberdorfer Pumps

    Bronze Close Coupled Centrifugal Pump BSPT

    170ME-A81

    $621.40
    Close coupled Bronze Centrifugal with motor.
    • Inlet: 3/4" BSPT
    • Outlet: 3/4" BSPT
    • Bronze Casting is resistant to sea water
    • Stainless Steel Shaft for Marine Use
    • Motor is totally enclosed with 9” long vinyl plastic insulated leads
    • Compact
    • Li...
  3. Oberdorfer Pumps

    Bronze Close Coupled Centrifugal Pump BSPT

    170ME-A82

    $591.50
    Close coupled Bronze Centrifugal with motor.
    • Inlet: 3/4" BSPT
    • Outlet: 3/4" BSPT
    • Bronze Casting is resistant to sea water
    • Bronze Casting is resistant to sea water
    • Stainless Steel Shaft for Marine Use
    • Motor is totally enclosed with 9” long vinyl p...
  4. Oberdorfer Pumps

    Bronze Close Coupled Centrifugal Pump BSPT

    172BE-A81

    $681.20
    Close coupled Bronze Centrifugal with motor.
    • INLET: 3/4" BSPT
    • OUTLET: 3/4" BSPT
    • Bronze Casting is resistant to sea water
    • Stainless Steel Shaft for Marine Use
    • Motor is totally enclosed with 9” long vinyl plastic insulated leads
    • Compact
    • ...
  5. Oberdorfer Pumps

    Bronze Close Coupled Centrifugal Pump BSPT

    172BE-A82

    $591.50
    Close coupled Bronze Centrifugal with motor.
    • INLET: 3/4" BSPT
    • OUTLET: 3/4" BSPT
    • Bronze Casting is resistant to sea water
    • Stainless Steel Shaft for Marine Use
    • Motor is totally enclosed with 9” long vinyl plastic insulated leads
    • Compact
    • ...
  6. Wayne

    1/2 HP Portable Electric Utility Pump

    PC4

    $300.01
    Model PC4 can be used to pump water from flooded basements, empty boats, drain stock tanks or water lawns and gardens, bathing washing your dog. It can also be used to boost line pressure like a hydro surge by as much as 40PSI for power washing...
    115v Learn More
  7. Oberdorfer Pumps

    Bronze Close Coupled Centrifugal Pump BSPT

    172BE-B27

    $1,093.30
    Close coupled Bronze Centrifugal with motor.
    • INLET: 3/4" BSPT
    • OUTLET: 3/4" BSPT
    • Bronze Casting is resistant to sea water
    • Stainless Steel Shaft for Marine Use
    • Motor is totally enclosed with 9” long vinyl plastic insulated leads
    • Compact
    • ...
  8. Oberdorfer Pumps

    Bronze Closed Coupled Centrifugal Pump

    500-F21

    $1,950.00

    The special pump alloys used provide corrosion resistanceto many liquids including water, water solutions, and a wide range of commercial chemicals. Questions as to the chemical compatibility of special liquids should be referred to the factory. ...

  9. AMT Pumps

    Stainless Steel Centrifugal Pedestal Pump

    3682-98

    $666.19

    AMT Straight Centrifugal Pedestal PTO pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal fo...

    1/2HP Learn More
  10. March Pumps

    Ryton mag pump 1/15hp

    TE-MDX-MT3 1PH

    $973.13

    TE-MDX-MT3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.

    Impeller PN 0135-0113-0200

    Motor is Totally Enclosed Fan Cooled - TEFC (not Explosion Proof ...

    115v TEFC Learn More
View as List Grid

Items 131-140 of 236

Set Descending Direction
per page