My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 121-130 of 192

Set Descending Direction
per page
  1. Oberdorfer Pumps

    Marine AC Cooling Water Pump

    300BP-F57

    $2,200.38
    Bronze self priming pump with 1/3 hp motor. Mounts to a NEMA 56J motor with a threaded shaft. Self priming / suction lift to 20 feet. (15 ft without a foot or check valve)

    Bronze models with Monel shaft sleeve - Ideal for marine service ( air con...

    1/3HP 230/460v Bronze Learn More
  2. Oberdorfer Pumps

    Raw Water pump Yacht AC

    300B-01J26

    $2,506.27
    Bronze marine pump. Pump for boat air conditioning cooling water. Self priming pump with 1/3 hp motor. Mounts to a NEMA 56J motor with a threaded shaft. Shaft sleeve is MONEL for maximum corrosion resistance in Salt water. Self priming / suctio...
    115v 1/3HP Learn More
  3. AMT Pumps

    Honda 1 inch Gas Water Pump

    4382-96

    $591.81
    Portable water pump has Honda 2.5HP 4-Cycle engine GXH50. Cast Aluminum Utility pump 3600GPH for use in construction, irrigation, fire fighting, wash down, general dewatering, & herbicides. Includes built in check valve for quick re-prime start...
    Portable water pump with Honda engine - Made in USA Learn More
  4. March Pumps

    TE-4MSR-MD Magnetic Drive Pump

    TE-4MSR-MD 1-1.5

    $2,036.25

    March Pump’s industrial TE-4MSR-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems.  It is capable of generating a maximum flow of 28...

  5. March Pumps

    TE-4MSR-MD Magnetic Drive Pump

    TE-4MSR-MD 3-1.5

    $2,036.25

    March Pump’s industrial TE-4MSR-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems.  It is capable of generating a maximum flow of 28...

  6. March Pumps

    Polypro 14gpm sealless pump

    BC-4C-MD 115V

    $563.63
    Polypro 14gpm sealless pump

    Series 4 pumps can deliver a maximum flow of 14 GPM (50 LPM) and are capable of serving applications with a maximum head of 21.5 ft. (4.7m) (49 ft. [15.6 m] when driven by an air motor). Applications include electroni...

    Fan cooled motor 115/230v PolyPro Learn More
  7. March Pumps

    MAG Pump 1/12HP

    AC-4C-MD 115V

    $471.38

    Series 4 pumps can deliver a maximum flow of 14 GPM (50 LPM) and are capable of serving applications with a maximum head of 21.5 ft. (4.7m) (49 ft. [15.6 m] when driven by an air motor). Applications include electronic medical equipment, etchin...

    115v ODP Learn More
  8. March Pumps

    Magdrive pump air motor

    BC-4C-MD-AM-Air

    $1,156.50

    Magdrive pump with Air Motor, pneumatic

    Magdrive pumps can deliver a maximum flow of 14 GPM (50 LPM) and are capable of serving applications with a maximum head of 21.5 ft. (4.7m) (49 ft. [15.6 m] when driven by an air motor). Magdrive pump appli...

  9. Wayne

    1 HP Portable Lawn Sprinkler / Utility Pump

    PLS100

    $469.51
    This pump is designed to sprinkle lawns and small gardens from lakes, ponds, or rivers, empty or fill stock tanks, remove standing water from flooded areas and transfer water.

    * 304 Stainless Steel pump housing / plastic impeller for durabilit...

    115v 1HP 720 Gallons Per Hour Learn More
  10. Hypro Pumps

    316SS pump .3HP

    COMSV11

    $1,073.36
    Close-Coupled Centrifugal Pump, 316 SS investment cast end-suction pump. Producing High flow rates, under low-head conditions. Designed for continous low-pressure circulatioon and transfer of non-flammable liquids, utility, boiler feed, general...
    1/3HP 115/230v Learn More
View as List Grid

Items 121-130 of 192

Set Descending Direction
per page