My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 41-50 of 559

Set Descending Direction
per page
  1. Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor

    UC1516AECCSVF4001409

    $10,222.89
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic radial t...
  2. Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor

    UC1516AECCSVF4121409

    $9,315.00
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...
  3. Pacer Pumps

    Plastic Corrosion Resistant pump PCE2AL-G.5C

    60-11A4-G.5C

    $879.75

    Plastic Corrosion Resistant Pump 1/2HP 1750RPM.

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics prov...

    115/230v 1/2 HP Learn More
  4. Webtrol

    2hp Booster Pump

    G15B20

    $5,169.60

    2hp Booster Pump

    Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is def...

    2HP 115/230V ODP Learn More
  5. MP Pumps

    FM5 Pump 1.5HP 3P

    35221

    $2,308.75

    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP. FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...

    1.5HP 230/460v CI Learn More
  6. Riverside

    6.5 HP Fire Water Pump

    E15PK

    $507.00

    6.5 HP Fire Water Pump

    E15PK 1.5" Pressure Pump, Self Prime Centrifugal pumps are used where maximum head, fast priming, and acombination of high volume and pressure are required. E15PK 1.5" Pressure Pump, Self Prime feature a sand cast aluminum ...

    6.5 HP Kohler SH265 Engine Learn More
  7. Webtrol

    SS Booster Pump

    M10B26 S16-3PHT

    $5,113.80
    Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is defined in the const...
    3HP 208-230/460V TEFC Learn More
  8. MP Pumps

    High Head Pedestal pump

    36647

    $2,995.75

    High Head Pedestal CI pump.

    Self priming high head centrifugal pump, pedestal mounted for pulley or belt drive on ship or boat.

    • 1 1/2 x 1 1/2" HIGH HEAD
    • ABS type approved for many shipboard services
    • FLOWS - TO 140 GPM
    • PRESSURES - TO 190 TDH...
    hhlf Learn More
  9. MP Pumps

    High Head pump Pumpak HHLF

    36085

    $2,430.68

    Self priming high head centrifugal pump, for close coupled to an electric motor supplied seperately. 

    • 1 1/2 x 1 1/2" HIGH HEAD
    • For “C” FACE ELECTRIC MOTOR DRIVE 184TC
    • FLOWS - TO 140 GPM
    • PRESSURES - TO 190 TDH
    • CAST IRON CONSTRUCTION
    • DRI...
    Electric motor pump kit Learn More
  10. MP Pumps

    Series 80 pump pak

    26038

    $1,450.00
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Pump kit NO motor. For 145TC
View as List Grid

Items 41-50 of 559

Set Descending Direction
per page