Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Hypro Pumps
PP Pedestal Pump
CHPPB6
$1,075.63Corrosion Resistant Polypropylene Centrifugal pumps. Mounted on a CI bearing pedestal for belt pulley or customer motor drive. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical ...chpp Learn More -
Hypro Pumps
Bronze centrifugal Pump
COMBB55
$1,933.91Hypro Bronze pump for salt water and other liquids needing corrosion resistance. Commercial duty seawater centrifugal pump. 1.5hp.
Pump Specs:
- 1.5HP
- 3450 RPM
- 115GPM Max flow
- 67 Feet (29 PS)I of Head
- Front drain plug
- Max. Flow 110gpm or 6,...
1 1/2HP 115/230v Bronze pump Learn More -
Hypro Pumps
High Head Pump
CHMSV673
$3,216.80316 Stainless Steel High Head Centrifugal Pumps.Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications...
SS,3HP,3ph Learn More -
Hypro Pumps
Bronze centrifugal Pump Pedestal
COPBB5
$4,225.79Shertech Pedestal-Mount Centrifugal Pump frame mounted. Shertech Pedestal Bronze pump. Can be coupled to users own driver, motor, engine or PTO. Rated for up to 1.5HP when used with a 3450 2-pole motor or gas engine. However if you use a slow s...Bronze Pedestal pump 1.5HP Learn More -
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9203C
$1,772.40- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9203C 1-1/2" NPT inlet, 1-1/4" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glass-...
-
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9203C-R
$1,798.80- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9203C-R 1-1/2" NPT inlet, 1-1/4" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glas...
-
Hypro Pumps
High Head Pump
CHMCV673
$1,260.02Cast Iron High Head Centrifugal Pumps.Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountai...
230/460V 3HP ODP Learn More -
Hypro Pumps
Corrosion Resistant PolyPro Pump
CHMPB34T
$3,341.77Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r... -
Hypro Pumps
PTO Drive Polypro pump
9008P-OB
$3,075.60PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. Silicon carbide seal. -
Hypro Pumps
PTO Drive Polypro pump
9016P-O
$3,852.00PTO Driven pump, centrifugal corrosion resistant. PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 6 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 600rpm. See performa...CCW Learn More
