Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
$6,818.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More -
Berkeley Pumps
B1-1/2ZPL (10HP - Single Phase - CI)
B55574
$9,330.00Berkeley B1-1/2ZPL B55574 water pump 10HP
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame. Often used for irrigation.
- All pumps offer back pull-out design
- Impeller size is 9""
- Cast Iron impeller ...
10HP 230/1 Packing Learn More -
Berkeley Pumps
B1-1/2ZPL (10HP - Three Phase - CI)
B53752
$7,623.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All centrifugal pumps offer back pull-out design
- Impeller size is trimmed
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
10HP 230/460V ODP PACKING Learn More -
Berkeley Pumps
B1-1/2ZPL (15HP - Three Phase - CI)
B53753
$8,275.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v PACKING Learn More -
Berkeley Pumps
B1-1/2TPL Berkeley Water Pump
B53749
$6,079.00Berkeley pump. End suction centrifugal pump, close coupled with Packing. Water pump for irrigation, water transfer, industrial applications. Use Berkeley pump on your chiller, water booster pump, fish hatchery, building fire sprinkler system.5HP 230/460v Learn More -
MP Pumps
High Head Bronze pump & motor
36086
$11,000.21High Head Pedestal Bronze pump.Self priming high pressure centrifugal pump, motor drive on ship or boat.
- 2 x 2" HIGH HEAD
- ABS type approved for many shipboard services
- FLOWS - TO 160 GPM
- PRESSURES - TO 190 TDH
- Bronze CONSTRUCTION
- DRIV...
5HP 230/460v Learn More -
American Stainless
Stainless Centrifugal Pump
C25438B5T3F
$3,560.94304 Stainless Steel high efficiency pump. SSPC2 assembly with a 5.4" x 0.380" imp, T16 M.Seal.5HP 230/460V TEFC Learn More -
AMT Pumps
Gas Engine Dredge Pump
316F-95
$2,229.13Dredge PumpGas Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving,...
Honda GX160 OHV w/ Oil Alert Learn More -
American Stainless
SS horizontal pump with 1.5 hp motor.
S24325BET3
$712.94ASP American Stainless Pump. Pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. The...
1 1/2HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 3 hp motor.
S24354B3T3
$984.91Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...3HP 230/460V TEFC Learn More
