Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
JB Centrifugal Pump High Head 2-1/2HP
JBHHG-53S
25% Off Special Price $1,975.50 Regular Price $2,634.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Sta-Rite
JB Centrifugal Pump High Head 2-1/2HP
JBHHG3-53S
25% Off Special Price $2,400.00 Regular Price $3,200.00This pump has a heavy-duty cast iron construction with silicon bronze impeller. Discontinued due to DOE efficiency standards of small pumps.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for ea...
-
Finish Thompson Pumps (FTI)
FTI Magnetic coupled pump
DB11P-M215
$2,520.95FTI Magnetic coupled pump DB11 close coupled to a 2HP TEFC motor.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled de...
2HP 230/460v Polypro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB11P-M207
$2,504.25Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1-1/2HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
FTI DB11 Magnetic coupled pump
DB11P-M216
$2,520.95Magnetic coupled pump.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation...
2HP 115/230v PolyPro Learn More -
MP Pumps
Flomax 8 Pedestal pump
21339
$1,020.00Flomax 8 pumps are self-priming pumps, pipe size 2" NPT. CI pump mounted to a CI bearing pedestal which has a 3/4" diameter shaft. Right hand rotation.Pedestal mounted CI 5" imp. Learn More -
MP Pumps
Flomax 8 Pedestal pump
21336
$1,540.00Aluminum Flomax 8 pumps are self-priming pumps, pipe size 2" NPT. Aluminum pump mounted to a CI bearing pedestal which has a 3/4" diameter shaft. Right hand rotation. 21330 is another version.The FLOMAXï½® series of pumps are commonly used in...
Aluminum Pedestal mnt Learn More -
MP Pumps
High Head Pedestal Bronze pump
36623
$8,740.00High Head Pedestal Bronze pump.Self priming high pressure centrifugal pump, pedestal mounted for pulley or belt drive on ship or boat.
- 2 x 2" HIGH HEAD
- ABS type approved for many shipboard services
- FLOWS - TO 160 GPM
- PRESSURES - TO 190 TD...
10HP-3ph PED 6.5 Imp. HR"W/BASE" Learn More -
MP Pumps
Centrifugal pump pedestal mounted
26643
$1,580.00Series 120 high capacity centrifugal pumps are close coupled to standard NEMA "C" face motors, Pedestal mounted or in kits for motor and gas engines. Adaptor protects the motor. Available in cast iron, or bronze construction to suit a wide variet...
-
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More
