Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
FTI Magnetic coupled pump
DB11P-M215
$2,520.95FTI Magnetic coupled pump DB11 close coupled to a 2HP TEFC motor.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled de...
2HP 230/460v Polypro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB11P-M207
$2,504.25Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1-1/2HP 230/460v Learn More -
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
$6,818.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More -
Berkeley Pumps
B1-1/2ZPL (10HP - Three Phase - CI)
B53752
$7,623.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All centrifugal pumps offer back pull-out design
- Impeller size is trimmed
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
10HP 230/460V ODP PACKING Learn More -
Berkeley Pumps
B1-1/2ZPL (15HP - Three Phase - CI)
B53753
$8,275.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v PACKING Learn More -
Berkeley Pumps
B1-1/2TPL Berkeley Water Pump
B53749
$6,079.00Berkeley pump. End suction centrifugal pump, close coupled with Packing. Water pump for irrigation, water transfer, industrial applications. Use Berkeley pump on your chiller, water booster pump, fish hatchery, building fire sprinkler system.5HP 230/460v Learn More -
American Stainless
Stainless Centrifugal Pump
C25438B5T3F
$2,099.61304 Stainless Steel high efficiency pump. SSPC2 assembly with a 5.4" x 0.380" imp, T16 M.Seal.5HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 1.5 hp motor.
S24325BET3
$671.00ASP American Stainless Pump. Pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. ...1 1/2HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 3 hp motor.
S24354B3T3
$984.91Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...3HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 2 hp motor.
S24340B2T3
$1,023.41Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...2HP 230/460V TEFC Learn More