My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 201-210 of 534

Set Descending Direction
per page
  1. Pacer Pumps

    ISPE2GL D3.0C

    58-52G4D3.0C

    $2,430.60

    Self-Priming SS Centrifugal Pumps, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps include a built-in check valve.

    These pumps are standard for mobile shower o...

    3HP 230/460v/3 Stainless 2" Learn More
  2. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-10MT

    $10,880.00

    High pressure centrifugal Pump.

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ...
  3. AMT Pumps

    Cast Iron SelfPrime

    2764-95

    20% Off Special Price $873.80 Regular Price $1,092.25
    AMT IPT Self-priming solids handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of h...
    230/460v 1-1/2HP ODP Learn More
  4. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-5M-1

    $9,320.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    230v-1ph Learn More
  5. Pacer Pumps

    Pacer Pump SPRY2EL C2.0C

    58-2E4-C2.0C

    $1,581.83

    Pacer Pump. S pump close coupled to a TEFC 115 / 230 /1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. See curve E

    Pacer S pump 58-12H4 C3.0C close coupled to a TEFC 3hp moto...

    2HP 230v Learn More
  6. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M-1

    $9,320.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  7. Pacer Pumps

    SE2EB C2.0C Self priming pump electric drive

    58-12E2-C2.0C

    $1,547.65
    Self priming pump close coupled to a TEFC 1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water and mild chemical transfer applications. Do not pump substances which have pH factor of over 10 or a tem...
    115/230v TEFC 2HP Learn More
  8. Sta-Rite

    1 HP Sprinkler Pump

    BPDH10

    $1,360.00

    Sprinkler pump 1hp PDH. Quick priming PD Series Pumps feature lightweight construction in a selfpriming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump co...

  9. Myers Pumps

    Framed Mtd. 2 Stage w/ motor

    I2CIB-10MT

    $10,880.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  10. AMT Pumps

    SS Centrifugal

    2764-98

    23% Off Special Price $1,700.88 Regular Price $2,208.94
    This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable...
    230/460v 1-1/2HP ODP Learn More
View as List Grid

Items 201-210 of 534

Set Descending Direction
per page