Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
FM8 w/ Motor
30935
$2,140.00FM8 Flomax 8 are self-priming pumps,
MP cast iron pump has pipe size 2" NPT. Electric Motor Driven Pump Cast Iron using a Close-Coupled Electric Motor-3 HP
3HP 230v/1 CI Learn More -
MP Pumps
FM 8 w/ 3HP Motor
22870
$3,470.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-3 HPCI 3HP 230/460v TEFC Learn More -
MP Pumps
FM 8 w/ Motor
22849
$3,700.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-5 HP5HP 230/460v Cast Iron Learn More -
MP Pumps
FloMax 10 Pump w/ Motor
22722
$3,750.00Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP 230/460v Learn More -
MP Pumps
HTO 120 Pump
29892
$4,140.00Centrifugal Hot Oil Pump Features:
- Applications: Asphalt plants, Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids. The HTO is used to move a heat transfer fluid on a double walled piping syste...
5.5" Impeller 5HP 3-Phase Learn More -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
American Stainless
Stainless Centrifugal Pump
C25438B5T3F
$2,099.61304 Stainless Steel high efficiency pump. SSPC2 assembly with a 5.4" x 0.380" imp, T16 M.Seal.5HP 230/460V TEFC Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CPH50C16S High Head
$2,570.57High pressure centrifugal water pump with electric motor. Good for wash down, irrigation, booster, chiller. Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive ...5HP 230v/1 Learn More -
Pacer Pumps
Centrifugal Pump
SE2HL-C3.0C
15% Off Special Price $1,484.10 Regular Price $1,746.00Pacer S pump 58-12H4 C3.0C close coupled to a TEFC 3hp motor.
Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlor...
3HP 230v/1 Learn More