Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.

March Pumps

Magnetic Kynar Pump

TE-7.5K-MD 3PH 2HP

$4,077.00

March Magnetic Series 7.5 Kynar pump.

TE-7.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems. It is capable of generating a maxim...

230/460v Learn More

Add to Wish List Add to Compare
March Pumps

Magnetic Pump

TE-7.5P-MD 3PH 2HP

$2,866.50

SALE March Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of glass filled Polypro. This makes them ideal for corrosive chemical applications. Chemical pumps for industrial process applicatio...

230/460v 2HP PolyPro Learn More

Add to Wish List Add to Compare
March Pumps

PP Magdrive Pump

TE-8C-MD 3PH

$4,897.13

March TE-8C-MD Magdrive pump.

Magnetic Series 8 chemical pumps for industrial process applications, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar & 316 stainless steel, are the ideal choice for handling difficult l...

3HP 230/460v
Learn More

Add to Wish List Add to Compare
March Pumps

316 Stainless Pump

TE-8S-MD 3PH 5HP

$11,718.00

March Series 8 chemical pumps for industrial process applications, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar & 316 stainless steel, are the ideal choice for handling difficult liquids, such as strong halogen ...

Learn More

Add to Wish List Add to Compare
March Pumps

316 Stainless Pump

TE-8S-MD XP 3PH 5HP

$12,901.50

Explosion Proof March Series 8 Stainless Steel chemical pumps for industrial process applications, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar & 316 stainless steel, are the ideal choice for handling difficult liq...

5HP Explosion proof Learn More

Add to Wish List Add to Compare
March Pumps

Magnetic Kynar Pump EXP

TE-7.5K-MD XP 3PH 2HP

$6,667.88

Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of natural Kynarï½®. This makes them ideal for sensitive applications where even a trace of foreign matter is unacceptable.

Exp. Proof Moto...

2hp/3ph/explosion proof Learn More

Add to Wish List Add to Compare
March Pumps

PVDF Pump

TE-8K-MD 3PH 3HP

$5,529.38

TE-8K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 120 gallons per minute at 30 feet, and...

3HP 230/460v Kynar Learn More

Add to Wish List Add to Compare