My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 81-90 of 166

Set Descending Direction
per page
  1. MP Pumps

    Hydraulic driven centrifugal pump

    27010

    $7,237.50
    Hydraulic driven centrifugal pump. End Suction Centrifugal Pump, close coupled to a hydraulically 1.59 driven motor. Pump has standard SAE two bolt "B" flange and 13 tooth internal spline shaft and is mounted to a Ultra hydraulic motor 2TR026. Of...
  2. Gorman-Rupp Pumps

    Bronze Circulator Pump

    5746-97

    $1,600.00

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. The line is powered by a single phase or 3 phase electri...

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Learn More
  3. Pacer Pumps

    SE3SB-1B30 DIESEL

    58-13S2 1B30

    $4,588.50

    3" Diesel Pacer Pump.

    Centrifugal Pump Self-Priming. Pacer S series with Hatz DIESEL engine. Great pump for tanker truck filling, dewatering or removing water from basements, ditches, swimming pools or anywhere a large volume of water needs to be...

    3" Diesel Learn More
  4. Pacer Pumps

    PCE3FL-HYC

    60-13F4-HYC

    $1,101.82

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvent...

  5. Pacer Pumps

    PCE3FL-P

    60-13F4-P

    $776.82

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvent...

    Long coupled 3" Learn More
  6. Pacer Pumps

    SE3LL Pedestal Pump

    58-13L4

    $774.18

    Pedestal drive self priming pump. Centrifugal Horizontal Mechanical Sealed. Pacer series with CAST IRON BEARING PEDISTAL for long coupling or belt drive. Great pump for removing water from basements, ditches, swimming pools or anywhere a large vol...

  7. Griswold Pumps

    Griswold Self Prime pump

    10HLS ODP

    $8,865.00
    Griswold Self Prime pump is a heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
    10HP 230/1 Learn More
  8. MP Pumps

    Flomax 15 Pump Pedestal

    21381

    $2,175.00
    Pedestal Mount Flomax 15 are self-priming pumps, pipe size 3" NPT. Frame or pedestal mount for use with standard motors. See other models for other mounts, or driver options. see flow curve for 3600 RPM. Note that with the optional impeller tr...
  9. AMT Pumps

    Trash Pump 3" Pedestal Frame Mount

    3S5XP

    $1,330.62
    Trash Pump 3" Pedestal Frame Mount. 3" Aluminum trash pump with cast iron impeller and wearplate. FKM seals for AG chemicals. Picture shows the engine mounted model for ref. only. Made in USA, no trash from China. Be aware of other pumps which ...
    FKM seals PTO drive Learn More
  10. AMT Pumps

    3" Diesel Trash Pump

    3942-D6

    $5,083.00
    Diesel Trash Pump. The AMT line of Engine Driven Trash pumps is designed for applications which require high flow efficiency and solids handling capability. Pumps are constructed of heavy duty sand cast components featuring removable/replaceabl...
    Yanmar Diesel Learn More
View as List Grid

Items 81-90 of 166

Set Descending Direction
per page