My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 21-30 of 166

Set Descending Direction
per page
Page
  1. Finish Thompson UC326BECSSVF5752530 ULTRAchem ANSI DIM. Mag Drive pump w/ 20hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 20hp motor

    UC326BECSSVF5752530
    $9,248.92
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic radial thr...
    Learn More
    Add to Wish List Add to Compare
  2. Finish Thompson UC326BECSSEF6372530 ULTRAchem ANSI DIM. Mag Drive pump w/ 20hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 20hp motor

    UC326BECSSEF6372530
    $11,529.90
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic radial thr...
    Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson UC326AECSSVF4622131 ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    UC326AECSSVF4622131
    $11,529.90
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...
    7.5HP/3ph Learn More
    Add to Wish List Add to Compare
  4. Koshin Pumps - SU-80L
    Sale

    Koshin Pumps

    Water Pump 3 inch Belt drive Dewatering Pump

    SU-80L
    33% Off Special Price $399.00 Regular Price $599.00

    Water Pump 3 inch, Koshin Pump with bearing frame for long coupling or belt drive.

    All aluminum die cast pump housing, with CI impeller and volute for lightweight and portability along with long life internal parts. These self priming pumps are g...

    3" 14,280GPH Learn More
    Add to Wish List Add to Compare
  5. Trunkpump TP-3PT

    TrunkPump

    Ventrac Steiner Tractor water Pump

    TP-3VS
    $2,279.00

    Ventrac Steiner Tractor water Pump

    Dewatering plastic PTO pumps work off the idea of Drive, Dip, Pump, and Go. A easy one person job now. Strong FRP PTO powered dewatering pump fits category one, 3-point hitch PTO powered @ 540 rpm (1000 avail.) ...

    3" Vertrac pump 420gpm FRP Learn More
    Add to Wish List Add to Compare
  6. Gorman-Rupp 3S5XP Trash Pump 3 Pedestal Frame Mount

    AMT Pumps

    Trash Pump 3" Kit

    3S5X
    $971.39

    Trash Pump 3" kit.

    3" Aluminum trash pump with cast iron impeller and wearplate in kit form for customer mounting to gas engine with 5/8"-16 threaded shaft. FKM seals for AG chemicals. Picture shows the Pedestal mounted model for ref. only. Made ...

    Pump Kit 5/8" shaft Learn More
    Add to Wish List Add to Compare
  7. MP 26812 Series 300

    MP Pumps

    Series 300

    26812
    $7,737.50
    Enclosed impellers are dynamically balanced to improve efficiency and bearing life. Standard carbon / ceramic / FKM mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
    Learn More
    Add to Wish List Add to Compare
  8. MP 27005 Series 300

    MP Pumps

    Series 300 PTO

    27005
    $3,850.00
    PTO End Suction Centrifugal Pump, frame mount with bearing pedestal foot mount. Made for belt drive or long coupled with shaft coupling.
    PTO drive Learn More
    Add to Wish List Add to Compare
  9. Berkeley B2-1/2TPMS B54572 Centrifugal Water Pump

    Berkeley Pumps

    B2-1/2TPMS Centrifugal Water Pump

    B54572
    $6,164.00

    B2-1/2TPMS Centrifugal Water Pump B54572.

    Centrifugal water pump by Berkeley. Heavy duty, cast iron End suction centrifugal pump, close coupled to a electric motor with mechanical seal.

    BERKELEY Close-Coupled End-Suction Pumps are ideal for most...

    7.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  10. MP_2CT electric trash pump 44193

    MP Pumps

    2CT-3HS Trash Pump w/ motor

    44193
    $6,612.50

    2CT Jaeger Trash Pumps, self-priming, cast iron. Close-coupled TEFC electric motor drive provided.

    The Model 2CT is a 3" x 3" Self Priming Trash Pump which is close coupled. This unit has cast iron construction with a ductile iron impeller, 304 s...

    3" 7.5HP 230/460v TEFC Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 21-30 of 166

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. inlet size 3" Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 157 items
  2. Magnetic Coupled (Seal-less) Pumps 8 items
Phase (Ø)
  1. Single (1) 12 items
  2. Three (3) 50 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 4 items
  3. 220-240/460-480 51 items
  4. 110-120/220-240 2 items
  5. 220-240 16 items
  6. 208-240/460 6 items
  7. 460-480 2 items
Horse Power (HP)
  1. 3/4 2 items
  2. 3 2 items
  3. 3 1/2 1 item
  4. 5 20 items
  5. 5 1/2 6 items
  6. 6 2 items
  7. 7 6 items
  8. 7 1/2 25 items
  9. 8 13 items
  10. 9 3 items
  11. 10 21 items
  12. 11 1 item
  13. 13 2 items
  14. 15 10 items
  15. 18 2 items
  16. 20 4 items
  17. 25 1 item
  18. 30 7 items
  19. 40 2 items
PRICE $
$  -  $
Manufacturer
  1. AMT Pumps 33 items
  2. Berkeley Pumps 5 items
  3. Darley Pumps 5 items
  4. EBARA Pumps 1 item
  5. Finish Thompson Pumps (FTI) 7 items
  6. Gorman-Rupp Pumps 10 items
  7. Griswold Pumps 13 items
  8. Koshin Pumps 3 items
  9. March Pumps 1 item
  10. MP Pumps 43 items
  11. Munro Pumps 7 items
  12. Pacer Pumps 22 items
  13. Riverside 3 items
  14. RS Corcoran 1 item
  15. Sta-Rite 1 item
  16. TrunkPump 4 items
  17. Tsurumi 3 items
  18. Webtrol 4 items
Motor
  1. Air-Pneumatic 1 item
  2. Diesel Engine 5 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 1 item
  4. Gas Engine 31 items
  5. Hydraulic Motor 7 items
  6. ODP 33 items
  7. PTO 7 items
  8. TEFC 58 items