Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2-1/2TPMS Berkeley Water Pump
B54650
Berkeley water pump B54650 B21/2TPMS
End suction centrifugal pump, close coupled with mechanical seal and NPT connections. Used for irrigation, fire sprinkler, boosting and general commercial water applications.
BERKELEY Close-Coupled End-Suctio...
10HP single phase Learn More -
Berkeley Pumps
Electric Self-Priming Pump
B60769
The type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and irriga...
15HP 230/460v 3" Learn More -
Berkeley Pumps
Centrifugal Water Pump
B54094
Berkeley B54094 Centrifugal water pump
End suction centrifugal pump, close coupled 30hp motor with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy maintenance and modera...
460v B2-1/2ZPLS Learn More -
Berkeley Pumps
B2-1/2ZPLS Centrifugal Water Pump
B66542S
End suction centrifugal pump, close coupled with mechanical seal.30HP 230/460v/3 Learn More -
Webtrol
HT Booster Pump
H60B31S-3PH
$26,235.00The Webtrol Ht Series is the original Heavy Duty Booster Pump, designed for high flow at high head. The HT Series Booster Pumps are built to withstand the rigorous demands generated through use in the Reverse Osmosis, Deionization, Car Wash, Wash...30HP 208-230/460V ODP Learn More -
Webtrol
HT Booster Pump
H60B34S-3PH
$26,740.80The Webtrol Ht Series is the original Heavy Duty Booster Pump, designed for high flow at high head. The HT Series Booster Pumps are built to withstand the rigorous demands generated through use in the Reverse Osmosis, Deionization, Car Wash, Wash...30HP 208-230/460V ODP Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT ODP
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v/3 Learn More -
Griswold Pumps
High Pressure pump CI SP 10HP
10HLT ODP
$8,014.90High Pressure pumps. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. High pressure pumps are used for irrigation, sprinkler, spraying and fire protection.10HP 230/460v Learn More -
Griswold Pumps
Sprinkler Pump
5JMS
$5,519.10Water sprinkler pump. Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can eas... -
Griswold Pumps
Irrigation Pump
75JMT ODP
$5,315.55Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily be re-adjusted aft...