My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 21-30 of 34

Set Descending Direction
per page
Page
  1. MP 35381 FM30 Pump Electric motor

    MP Pumps

    FM30 Pump Electric motor

    35381
    $7,200.00
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Close coupled Electric motor. Used for irrigation, water transfer.
    15HP 230/460v Learn More
    Add to Wish List Add to Compare
  2. Gorman-Rupp 5746-97 Bronze Circulator Pump

    Gorman-Rupp Pumps

    Bronze Circulator Pump

    5746-97
    20% Off Special Price $1,280.00 Regular Price $1,600.00

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. The line is powered by a single phase or 3 phase electri...

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Learn More
    Add to Wish List Add to Compare
  3. Pacer PCE3FL-D5.OC 60-13F4-D5.OC

    Pacer Pumps

    PCE3FL-D5.OC Plastic pump

    60-13F4-D5.OC
    $1,667.00

    Plastic PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, s...

    5HP 230/460v Learn More
    Add to Wish List Add to Compare
  4. MP 24395 FM 15 w/ motor

    MP Pumps

    FM 15 w/ motor

    24395
    $3,440.00
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast Iron Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.
    5HP 230/460v CI Learn More
    Add to Wish List Add to Compare
  5. Pacer 58-73M8 P3 58-0117A Trash Pump Electric 7.5HP

    Pacer Pumps

    Trash Pump Electric 7.5HP

    58-73M8 P3 58-0117A
    $4,458.00
    T series long coupled Trash Pump Electric. Self-priming, corrosion resistant Trash pump, long coupled TEFC motor driven. Industrial Open Drip Proof electric motor driven. Pump casing is made or rugged glass reinforced polyester, SS fasteners, ...
    TE3MBB 7.5HP TEFC 230/460v Learn More
    Add to Wish List Add to Compare
  6. MP 31925-30-3T Chemflo 8 316 stainless pump motor

    MP Pumps

    Chemflo 8 316 stainless pump & motor

    31925-30-3T
    $5,316.30
    316 SS end suction centrifugal pump close coupled to a 30HP TEFC motor. 3" x 1.5" Flanged connections, center line discharge. Type 21 mechanical seal, FKM elastomers.
    Learn More
    Add to Wish List Add to Compare
  7. MP 35844 316SS Centrifugal

    MP Pumps

    316SS Centrifugal

    35844
    $6,390.00
    Chemical pump, Chemflo 6.

    316 Stainless steel Centrifugal Pump.

    If used in a bio-diesel application a ni-resist seal is needed. EXP motor is also available as a option.

    7.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  8. March - TE-10K-MD pump

    March Pumps

    10 Magdrive March pump

    TE-10K-MD 3PH 10HP
    15% Off Special Price $5,532.65 Regular Price $6,509.00

    TE-10 Magdrive March pump for Acids

    March acid pump series 10 magdrive pump. Kynar PVDF magnetic coupled pump. March pump is the industry leader in selection and value in acid, chemical and process pumps or the magnetic drive sealless type. March...

    Learn More
    Add to Wish List Add to Compare
  9. 10HLT TEFC CI SP pump 10HP

    Griswold Pumps

    CI SP pump 10HP

    10HLT TEFC
    $8,208.00
    Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
    10HP 230/460v Learn More
    Add to Wish List Add to Compare
  10. Finish Thompson KC32VCV601804 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32VCV601804
    $9,962.94
    Finish Thompson Inc. Pump. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic ...

    Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 21-30 of 34

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Voltage (Range) 220-240/460-480 Remove This Item
  2. inlet size 3" Remove This Item
  3. Motor TEFC Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 30 items
  2. Magnetic Coupled (Seal-less) Pumps 4 items
Phase (Ø)
  1. Three (3) 33 items
Horse Power (HP)
  1. 3/4 1 item
  2. 3 1 item
  3. 5 5 items
  4. 7 1/2 11 items
  5. 10 9 items
  6. 15 4 items
  7. 20 1 item
  8. 30 1 item
PRICE $
$  -  $