Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B3TQMS-18 High Pressure pump Engine Driven
B71149
$112,300.00High Pressure pump Engine Driven .compact, designed with a minimum number of parts and no extra bearings to lubricate or replace. There is no coupling to maintain or align. Ideally suited for either high pressure fire irrigation or high flow ...
Electric Start Learn More -
Berkeley Pumps
B4TQKLS-18 Self prime water pump Engine Driven
B71546
$15,339.00Self Prime water pump Engine Driven.
Berkeley pumps are reliable, compact, designed with a minimum number of parts and no extra bearings to lubricate or replace. There is no coupling to maintain or align. Ideally suited for either fire, irrigatio...
18HP 42,000GPH Learn More