Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2-1/2ZPLS Centrifugal Water Pump
B54092
$10,563.00B2-1/2ZPLS Centrifugal Water Pump by Berkeley
End suction centrifugal pump, close coupled to a electric motor 20hp with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy m...
20HP 230/460v/3 Learn More -
Berkeley Pumps
B2ZPLS Centrifugal Water Pump 20hp
B74492
$7,830.14BERKELEY Close-Coupled high head Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller without distur...230/460v/3 20HP 2-1/2"x2" Flange Learn More -
Berkeley Pumps
B2ZPLS Centrifugal Water Pump
B73901
$8,500.00OBSOLETE BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller wit...OBSOLETE 230/460v/3 20HP 2-1/2"x2"NPT Learn More -
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B54112
$11,046.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.20HP 230/460v/3 ODP Learn More -
Berkeley Pumps
B4ZPBH High Flow Irrigation Pump 20HP
B85686
$10,852.00The type B, High Flow/High Efficiency Centrifugal Irrigation pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire ...
20HP CW Sealed Learn More -
MP Pumps
FM30 Pump Electric motor
34838
$7,760.00Flomax 30 are self-priming pumps, pipe size 3" NPT. Close coupled Electric motor. Used for irrigation, water transfer.20HP 230/460v Learn More -
MP Pumps
Series 300
26812
$6,190.00Enclosed impellers are dynamically balanced to improve efficiency and bearing life. Standard carbon / ceramic / FKM mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid. -
Griswold Pumps
CI SP pump 20HP
20HHT TEFC
$9,735.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.20HP 230/460v TEFC 4" Learn More -
Berkeley Pumps
B1-1/2ZPLS
B08607
$9,996.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
20HP 230/460v Learn More -
Berkeley Pumps
B1-1/2EPLS
B54078S
$13,274.00B1-1/2EPLS B54078s Berkeley Pump 20hp
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suctio...
20HP 230/460v Learn More