My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 20

Set Descending Direction
per page
Page
  1. MP 27005 Series 300

    MP Pumps

    Series 300 PTO

    27005
    $3,850.00
    PTO End Suction Centrifugal Pump, frame mount with bearing pedestal foot mount. Made for belt drive or long coupled with shaft coupling.
    PTO drive Learn More
    Add to Wish List Add to Compare
  2. 20HHT TEFC CI SP pump 20HP

    Griswold Pumps

    CI SP pump 20HP

    20HHT TEFC
    $9,735.00
    Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
    20HP 230/460v TEFC 4" Learn More
    Add to Wish List Add to Compare
  3. Berkeley - B08607: B1-1/2ZPLS

    Berkeley Pumps

    B1-1/2ZPLS

    B08607
    $9,996.00
    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
    • All pumps offer back pull-out design
    • American Made
    • Berkeley Pump discharge size: 1-1/2"
    • Berkeley Pump suction size: 2"
    applications irrigation...
    20HP 230/460v Learn More
    Add to Wish List Add to Compare
  4. Berkeley_B.jpg

    Berkeley Pumps

    B1-1/2EPLS

    B54078S
    $13,274.00

    B1-1/2EPLS B54078s Berkeley Pump 20hp

    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.

    • All pumps offer back pull-out design
    • American Made
    • Berkeley Pump discharge size: 1-1/2"
    • Berkeley Pump suctio...
    20HP 230/460v Learn More
    Add to Wish List Add to Compare
  5. Berkeley B4ZPBH B85685 High Flow Irrigation Pump 20HP 1800/60/3

    Berkeley Pumps

    B4ZPBH High Flow Irrigation Pump 20HP

    B85685
    $11,272.00

    High Flow/High Efficiency Centrifugal Irrigation Pump
    Dependable Performance for High-Volume Applications

    The Berkeley B85685 High Flow/High Efficiency Centrifugal Pump is designed for reliability and versatility, making it an excellent choice for...

    20HP CW Packed Learn More
    Add to Wish List Add to Compare
  6. Myers I2CIB-20M Frame Mtd. 2 Stage w/ motor

    Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-20M
    $10,420.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

    Learn More
    Add to Wish List Add to Compare
  7. Myers I2CIB-20MT Frame Mtd. 2 Stage w/ motor

    Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-20MT
    $12,370.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    Learn More
    Add to Wish List Add to Compare
  8. Myers I2CB-20MT Frame Mtd. 2 Stage w/ motor

    Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-20M
    $10,420.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    20HP Learn More
    Add to Wish List Add to Compare
  9. Sta-Rite CSPHN3 PKG184 Commercial Pool Pump

    Sta-Rite

    Commercial Pool Pump

    CSPHN3 PKG184
    $11,344.20
    Sta-rite commercial duty pool pump. Heavy duty self-priming CI pool pump. Especially designed for commercial and public swimming pools, spas, water parks and fountains. Pump has a high efficiency enclosed bronze centrifugal impeller. Connections ...
    Learn More
    Add to Wish List Add to Compare
  10. Munro MU20MT CI self prime pump 20HP

    Munro Pumps

    CI self prime pump 20HP

    MU20MT
    $14,300.00
    Self-priming high-head & high flow pump. Three phase, 20 hp, 230/460vac,

    Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. MU2OMT

    Self-priming high-head & high flow pump. Three phase, 20 hp, 230/460vac, Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 20

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Horse Power (HP) 20 Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 18 items
  2. Magnetic Coupled (Seal-less) Pumps 2 items
Phase (Ø)
  1. Three (3) 19 items
Voltage (Range)
  1. 220-240/460-480 17 items
  2. 208-240/460 1 item
  3. 460-480 1 item
inlet size
  1. 2in 3 items
  2. 2 ½" 1 item
  3. 3" 4 items
  4. 4" 2 items
  5. 6" 1 item
PRICE $
$  -  $
Manufacturer
  1. Berkeley Pumps 9 items
  2. Finish Thompson Pumps (FTI) 2 items
  3. Griswold Pumps 1 item
  4. MP Pumps 3 items
  5. Munro Pumps 1 item
  6. Myers Pumps 3 items
  7. Sta-Rite 1 item
Motor
  1. ODP 12 items
  2. TEFC 7 items