Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
FTI DB5.5P Magnetic pump Polypro
DB5.5P-M233
$829.19Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/4 Hp 115V, TEFC Learn More -
Finish Thompson Pumps (FTI)
DB5.5V-M613 pump Kynar
DB5.5V-M233
$961.63Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-couple...
1/4 Hp 115V, TEFC, Kynar Learn More -
Jabsco Pumps
Bronze Utility Pump
18610-0003
$711.00For general transfer pumping where self-priming, 6 gpm flow, debris tolerance and portable 115VAC operation is desired. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. Do not run dry. Mo...
-
March Pumps
Stainless Magnetic Pump Explosion proof motor
TE-5S-MD XP 1PH 1/4HP
$2,990.00Stainless Magnetic Pump, Explosion Proof Motor.
316 Stainless Steel magnetic coupled pump. Motor is Explosion Proof 115/230 single phase. Stainless steel is often used for high liquid temperatures, solvents and chemicals not suitable for engineer...
115/230v Explosion Proof Learn More -
Jabsco Pumps
Bronze Utility Pump
18610-0271
$654.00Portable Pump For general transfer pumping where self-priming, 6 gpm flow, debris tolerance and portable 115VAC operation is desired. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. D...115v Learn More -
Jabsco Pumps
Bronze Utility Pump
18610-0273
$654.00Portable Pump. For general transfer pumping where self-priming, 6 gpm flow, debris tolerance and portable 115VAC operation is desired. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. ... -
Jabsco Pumps
Bronze Portable Pump
18610-0001
$654.00Bronze Portable Pump, marine water utility pump. For general transfer pumping where self-priming, 6 gpm flow, debris tolerance and portable 115VAC operation is desired. Long lasting AC induction motor has no brushes to wear out. Do not pump gas... -
AMT Pumps
Bronze Saltwater pump
3670-97
$554.00Naval Bronze Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The bronze centrifugal pump has been sized for saltwater (1.03 specific gravity) and features: provisions for the installation of a ...1/4HP 115v Made in USA Learn More