My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 131-140 of 280

Set Descending Direction
per page
Page
  1. Gorman-Rupp 5745-97 Bronze Circulator Pump

    Gorman-Rupp Pumps

    Bronze Circulator Pump

    5745-97
    $1,600.00

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. The line is powered by a single phase or 3 phase electri...

    Bronze Circulator 3/4HP 115/230v Learn More
    Add to Wish List Add to Compare
  2. Booster Pump

    Sta-Rite

    Booster Pump

    HPS10D3-01
    $3,084.00
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components...
    Learn More
    Add to Wish List Add to Compare
  3. High Volume SS Straight Centrifugal Pump

    AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5473-98
    $868.06

    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating, RO and applications requir...

    230/460v 3/4HP Learn More
    Add to Wish List Add to Compare
  4. Gorman-Rupp 5746-97 Bronze Circulator Pump

    Gorman-Rupp Pumps

    Bronze Circulator Pump

    5746-97
    $1,600.00

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. The line is powered by a single phase or 3 phase electri...

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Learn More
    Add to Wish List Add to Compare
  5. 282K-95_10.gif

    AMT Pumps

    1.5 Self Priming Electric Pump

    282D-95
    $978.56

    1.5" Self Priming Electric pump.

    AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. 3/4hp Cast Iron 110v 115v 120v 115/230v electri...

    115/230v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  6. 282K-95_7.gif

    AMT Pumps

    CI Centrifugal Self Priming 4,689 GPH

    2825-95
    $902.06

    This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of...

    115/230v 3/4HP ODP Learn More
    Add to Wish List Add to Compare
  7. 379D-95_8.gif

    AMT Pumps

    Sprinkler pump Booster

    3790-95
    $897.81

    3/4HP Sprinkler pump or booster pump feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check va...

    3/4HP 115/230v ODP Learn More
    Add to Wish List Add to Compare
  8. Flotec FP4322 Corrosion Resistant Convertible Jet pumps

    Flotec Pumps

    Corrosion Resistant Convertible Jet pumps

    FP4322
    $823.00

    Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, have a high resistance to sand and abrasive wear and assure years of dependable service. Ideal for shallow well applications with pumping...

    3/4 HP Learn More
    Add to Wish List Add to Compare
  9. Cast Iron Convertible Jet pumps

    Flotec Pumps

    Cast Iron Convertible Jet pumps

    FP4222
    $797.00

    Cast Iron convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, have a high resistance to sand and abrasive wear and assure years of dependable service. Ideal for shallow well applications with pumping levels to 25'...

    3/4 HP Learn More
    Add to Wish List Add to Compare
  10. 490D-98_40.gif

    AMT Pumps

    High Pressure Bronze Centrifugal Pump

    489D-97
    $1,440.75

    Bronze High Head Centrifugal Pumps. Obsolete. See alternatives. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation ...

    230/460v 3/4HP TEFC Bronze - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 131-140 of 280

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Horse Power (HP) 3/4 Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 259 items
  2. Magnetic Coupled (Seal-less) Pumps 21 items
Phase (Ø)
  1. Single (1) 143 items
  2. Three (3) 98 items
Voltage (Range)
  1. 110-120 8 items
  2. 208-230/460//190-220/380-415 7 items
  3. 220-240/460-480 40 items
  4. 110-120/220-240 150 items
  5. 220-240 5 items
  6. 208-240/460 65 items
  7. 12/24/36 VDC 5 items
inlet size
  1. Less than 1in 14 items
  2. 1in 46 items
  3. 1 ¼" 95 items
  4. 1 ½" 96 items
  5. 2in 5 items
  6. 3" 2 items
PRICE $
$  -  $
Manufacturer
  1. American Stainless 13 items
  2. AMT Pumps 37 items
  3. Barnes Pumps 2 items
  4. EBARA Pumps 6 items
  5. Finish Thompson Pumps (FTI) 8 items
  6. Flotec Pumps 5 items
  7. Gorman-Rupp Pumps 2 items
  8. Hypro Pumps 9 items
  9. Little Giant Pumps 4 items
  10. March Pumps 4 items
  11. MP Pumps 10 items
  12. MTH Pumps 43 items
  13. Munro Pumps 1 item
  14. Myers Pumps 6 items
  15. Oberdorfer Pumps 3 items
  16. Pacer Pumps 4 items
  17. Pedrollo Pumps 10 items
  18. PumpBiz 4 items
  19. RS Corcoran 1 item
  20. Serfilco 13 items
  21. Sta-Rite 32 items
  22. Wayne 2 items
  23. Webtrol 61 items
Motor
  1. ChemDuty 1 item
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 12 items
  3. EXP (C 1, Gp C/D) 18 items
  4. Hermetically Sealed 3 items
  5. ODP 141 items
  6. TEFC 96 items
  7. TENV 2 items