Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM 8 w/ Motor
26478
$2,131.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 230/460v/3.2HP 230/460v TEFC CI Learn More -
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
Series 80 w/ motor
26535
$1,710.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3-phase, 230/460 V, 3450 RPM. Pumps are right hand rotation with bronze enclosed impeller. -
MP Pumps
Series 80 w/ motor
26538
$1,980.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.2hp 3phase Learn More -
MP Pumps
Series 80 w/ motor
26540
$2,150.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 1-phase, 115/230 V, 3450 RPM. -
MP Pumps
Series 110 w/ motor
24580
$1,450.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3450 RPM. -
MP Pumps
Series 80 w/ motor Ex
26538-1
$2,599.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Explosion Proof Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.Explosion proof Learn More -
Berkeley Pumps
SSHM-2-3P Sprinkler Turf AG Pump
B82639
Sprinkler pump Irrigation pump High pressure pump.
The Berkeley SSHM-2 Self-Priming Pump consistently delivers high pressure performance without priming problems and delays. 4 stage sprinkler pump. Designed for minimal electrical consumption and ...
230/460v 3-Phase 4-Stage Learn More -
Pedrollo Pumps
Clear water pump
PK20H36S
$1,028.97Turbine Pump, Peripheral pump, clear water pump.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplicity...
2HP 230/460v Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CP20C16S
$781.77Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMEST...2HP 230v/1 Learn More