My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 41-50 of 229

Set Descending Direction
per page
  1. AMT Pumps

    Booster Pump MSV5 2HP 5 stage pump

    MSV5-5-1

    $1,243.13
    Multistage Vertical booster pump. Commercial duty pump for chillers, hot process water, boosting city water pressure, boiler feed, irrigation, fire sprinkler system, washdown.
    • 304 Series Stainless Steel Components with Teflonï½® Wear Rings
    • ...
    115/230V/1 2HP Learn More
  2. AMT Pumps

    Self Priming Cast Iron Pump

    2SP20C-1P

    $1,311.13

    2HP Self-priming Cast Iron pump

    for circulating liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water...

    2HP 1 phase Learn More
  3. AMT Pumps

    MSV3 2 HP 12 stage pump

    MSV3-12-1P

    $1,756.31

    2HP Multistage Vertical booster pump, 12 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations includ...

    2HP 230v Learn More
  4. AMT Pumps

    Cast Iron Centrifugal Pump

    369E-95

    $916.94

    Cast Iron Centrifugal pump, 2HP

    Circulation Pumps for Water and Oil, Cast iron with 316SS impeller Centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, ch...

    230/460v 2HP TEFC Learn More
  5. Webtrol

    2hp Booster Pump

    G15B20

    $5,169.60

    2hp Booster Pump

    Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is def...

    2HP 115/230V ODP Learn More
  6. MP Pumps

    Series 80 w/ motor Ex

    26538-1

    $3,248.75
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Explosion Proof Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.
    Explosion proof Learn More
  7. Berkeley Pumps

    SSHM-2-3P Sprinkler Turf AG Pump

    B82639

    $3,371.31

    Sprinkler pump Irrigation pump High pressure pump.

    The Berkeley SSHM-2 Self-Priming Pump consistently delivers high pressure performance without priming problems and delays. 4 stage sprinkler pump. Designed for minimal electrical consumption and ...

    230/460v 3-Phase 4-Stage Learn More
  8. Pedrollo Pumps

    Clear water pump

    PK20H36S

    $1,605.19
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplicity...

    2HP 230/460v Learn More
  9. American Stainless

    SS pump & motor

    C15217B2T1

    $1,781.83
    Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...
    2HP 115/230V TEFC Learn More
  10. American Stainless

    SS pump & motor

    C14622B2T1

    $1,451.01
    Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...
    2HP 115/230V TEFC Learn More
View as List Grid

Items 41-50 of 229

Set Descending Direction
per page