My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 131-140 of 203

Set Descending Direction
per page
  1. EBARA Pumps

    NSF SS Pump 5 HP

    A3U-40-125A50D1G

    $2,902.12

    NSF SS Pump 5HP

    Potable Water Pump, NSF / ANSI 61 certified. Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed t...

    5HP 115/230V ODP Learn More
  2. EBARA Pumps

    SS Pump 5 HP ODP

    A3U-40-125A50D1C

    $2,681.36

    SS EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for l...

    5HP 115/230V ODP Learn More
  3. EBARA Pumps

    Stainless Steel Pump 5 HP ODP

    A3U-40-125B50D1G

    $3,670.00

    5HP EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for ...

    5HP 230V ODP Learn More
  4. EBARA Pumps

    SS Pump 5 HP TEFC

    A3U-32-160A50T1C

    $3,582.73
    Stainless Steel Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-lasting ind...
    5HP 230V TEFC Learn More
  5. EBARA Pumps

    SS Pump 5 HP TEFC

    A3U-32-160A50T3C

    $3,001.93

     Stainless Steel Centrifugal Pump

    The EBARA Stainless Steel Series Centrifugal Pumps are engineered for dependability, rugged performance, and continuous duty operation under the most demanding conditions. Built tough and designed for professiona...

    5HP 230/460V TEFC Learn More
  6. Gorman-Rupp Pumps

    3" Diesel powered Trash Pump

    3S7XZR

    $8,547.81

    Trash pump, powered by diesel

    Hatz 5 HP engine (changing in 2019 to 1B30). 3" Cast aluminum housing with Cast Iron internals.trash pump. 2.6 qt fuel tank provides 110 min. continuous running.

    Ideally suited for a variety of industrial applicatio...

    3" Hatz Diesel 1B30 Learn More
  7. AMT Pumps

    Gas Hi-Pressure Fire Pump

    4789-95

    $1,979.44

    Gas Engine Driven Hi-Pressure Fire Pump ON SALE.

    Self-priming high Pressure pump for lawn sprinkling, Agricultural spraying, fire fighting, pile driving, emergency water supply & pressure boosting. 2 stage, cast iron diffusers & Stainless Steel c...

    1.5" Honda 5HP, GX160 2stg Learn More
  8. AMT Pumps

    Thermoplastic pump 8460GPH Honda

    382A-99

    $973.25

    Honda engine water pump. Utility pump 8460 GPH for use in construction, irrigation, fire fighting, water truck & general dewatering, Calcium and magnesium chloride de-icing solutions & herbicides. Also as a disposable pump for latex blacktop seale...

    5HP Honda GC160 - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
  9. MP Pumps

    CHEMFLO 8 5HP 1725

    33211-333

    $4,635.00
    Horizontal 316 Stn. Stl. close coupled to a 3 HP 1725 RPM 3 phase motor.
  10. Finish Thompson Pumps (FTI)

    Chemical Magnetic Pump

    KC32PCE0501803

    $8,046.62
    Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pumps include:

    RUN DRY ...

View as List Grid

Items 131-140 of 203

Set Descending Direction
per page