Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2-1/2ZPMS Centrifugal Water Pump
B74632
$8,563.00End suction centrifugal pump, close coupled 7.5HP 3ph ODP electric motor. Berkeley pump with mechanical seal. Silicon Bronze impeller7.5hp-3ph Learn More -
Barmesa Pumps
IA1-7.5-2 High Head pump
62210004
$1,855.00High Head End-Suction Centrifugal Pump.
Commercial duty pumps featuring tangent discharge and retrofit to other OEM pumps often used on chillers, cooling towers. High head means higher pressure at medium flow rates
Applications
- Booster system...
7.5HP 230/460v ODP Learn More -
Barmesa Pumps
IB2.5-7.5-2 Center Line Discharge
62071046
$2,440.00Center Line Discharge End-Suction Centrifugal Pump. IB21/2
Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. For process applications, dewatering,...
7.5HP 230/460v 3" Learn More -
Barmesa Pumps
IB2-7.5-2 Center Line Discharge
62071027
$2,137.00Center Line Discharge End-Suction Centrifugal Pump.
Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. Top centerline discharge similar to many ANS...
7.5HP 230/460v TEFC Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54605
$8,502.007.5HP Berkeley End suction centrifugal water pump,
close coupled with mechanical seal. Used for irrigation, fountains, spa, pools and other water transfer applications.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications req...
230/460 7-1/2HP Learn More -
Berkeley Pumps
B3TPMS Centrifugal Water Pump 7.5HP/3ph
B74757
$6,567.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool, commercial dishwasher lvo and other water transfer applications.7.5hp Learn More -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor
UC326AECSSVF4622131
$11,529.90Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...7.5HP/3ph Learn More -
Berkeley Pumps
B5WPS Water Pump
B62580
$9,052.17Berkeley Pump End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Silicon Bronze impeller. Obsolete due to DOE new efficiency standards.7.5HP 3ph OBS Learn More -
Finish Thompson Pumps (FTI)
Magnetic Acid pump
DB22P4-M237
$6,283.28Magnetic Acid pump chemical Duty, close coupled to a TEFC motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Pol...Polypro 7.5HP 230/460v Learn More -
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
$6,818.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More
