My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 41-50 of 106

Set Descending Direction
per page
  1. Griswold Pumps

    CI SP pump 7.5HP

    75HLT TEFC

    $13,562.00
    Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
    7-1/2HP 230/460v Learn More
  2. Griswold Pumps

    Irrigation Pump

    75JMT ODP

    $5,315.55
    Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily be re-adjusted aft...
  3. Berkeley Pumps

    B1-1/2TPMS High Pressure Water Pump

    B58086

    $5,881.00
    High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...
    7.5HP 230/460V ODP Learn More
  4. MP Pumps

    High Head Pump & Motor HHLF

    36301

    $5,595.41

    Self priming high head centrifugal pump, close coupled to an electric motor.

    • 1 1/2 x 1 1/2" HIGH HEAD
    • FLOWS - TO 140 GPM
    • PRESSURES - TO 190 TDH
    • CAST IRON CONSTRUCTION
    • DRIVE SLEEVE - 304 STAINLESS STEEL
    • Close Coupled Motor
    • SEALS - STANDA...
    7.5HP 230/460v Learn More
  5. MP Pumps

    Series 200 pump

    35804

    $7,042.75
    Bronze Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizonta...
    7.5HP 230/460v Learn More
  6. Berkeley Pumps

    B1-1/2ZPL (7.5HP - Single Phase - CI)

    B54499

    $7,354.00
    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
    • All pumps offer back pull-out design
    • Impeller size is 9""
    • Berkeley Pump discharge size: 1-1/2"
    • Berkeley Pump suction size: 2"
    applications irr...
    7.5hp 230v/1 Sealed Learn More
  7. Serfilco

    HF3x2CM1L(M8)-D7.5

    47-5011A

    $6,938.31
    CPVC Centrifugal Horizontal Mechanical Sealed Pump 7.5 Hp Series “HE” Horizontal Pumps feature “total” chemical resistance with non-metalic construction of all wetted components. The molded, enclosed impellers are designed to provide maximum p...
    7 1/2HP 208-230/460V Learn More
  8. AMT Pumps

    3" Self-Prime Pump

    2876-95

    $2,649.88

    AMT 7-1/2HP self-priming pump.

    Designed for a broad range of high capacity solids handling semi-trash applications. The Centerline discharge is specifically designed to prevent vapor binding and makes for more convenient piping connections. Heavy...

    7.5HP 230/460v Learn More
  9. Berkeley Pumps

    B4ZPBH High Flow Irrigation Pump 7.5HP

    B85691

    $8,235.00

    The type B, High Flow/High Efficiency Centrifugal Irrigation pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fi...

    7.5HP Packed Flanged 230/460v Learn More
  10. AMT Pumps

    Electric Trash pump 7.5HP 1P

    394H-95

    $4,695.19

    Electric Trash pump Single Phase motor. AMT IPT 394B-95 (former) Cast Iron Sewage Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". ...

    230V/1 16,800 GPH, 3" Learn More
View as List Grid

Items 41-50 of 106

Set Descending Direction
per page