Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Pump Bronze
4240-94
$2,293.94High Pressure Bronze pump. AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Semi-open impeller features self-cleaning a...230/460v 7.5HP TEFC Learn More -
AMT Pumps
Stainless High Pressure Centrifugal Pump 7.5hp
4240-98
$2,973.94Stainless High Pressure pump.
AMT Industrial Straight Centrifugal high head pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Semi-open impeller features self...
230/460v 7.5HP TEFC Learn More -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor
UC326AECSSVF4622131
$11,529.90Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...7.5HP/3ph Learn More -
Berkeley Pumps
B5WPS Water Pump
B62580
$9,052.17Berkeley Pump End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Silicon Bronze impeller. Obsolete due to DOE new efficiency standards.7.5HP 3ph OBS Learn More -
Finish Thompson Pumps (FTI)
Magnetic Acid pump
DB22P4-M237
$6,283.28Magnetic Acid pump chemical Duty, close coupled to a TEFC motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Pol...Polypro 7.5HP 230/460v Learn More -
MP Pumps
FloMax 10 Pump w/ Motor
22779
$6,950.00Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP 230 1phase Learn More -
MP Pumps
FM 15 230v
38481
$5,137.50Flomax 15 230v/1 are self-priming pumps, pipe size 3" NPT. Single Phase Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP
Anyone who has ever owned or maintained a pool will tell you that every pool needs a good filte...
7.5HP 230v/1 TEFC Learn More -
AMT Pumps
MSV5-18-3p
MSV5-18
$2,091.00Multistage Vertical booster water pump, 7.5hp three phase.- 304 Series Stainless Steel Components with Teflonï½® Wear Rings
- Cast Iron Base & Adapter
- 1-1/4ï½½ NPT
- NEMA 56C or 182/4 TC Dual Cycle 50/60 Hz,
- Single or Three Phase TEFC Motors
- E...
7.5hp 3phase Learn More -
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
$6,818.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More -
MP Pumps
High Head Bronze pump & Motor
36194
$10,905.58High Head Pedestal Bronze pump.
Self priming high head centrifugal pump, motor drive on ship or boat.HHL-FLOMAX “HR” high pressure
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS type approved for many shipboard services
- FLOWS - TO 140 GPM
- PRESSURES - TO...
HHLF 7.5-3 184TC TEFC 6.7imp Learn More
