My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 42

Set Descending Direction
per page
Page
  1. Myers I2CB-7M Frame Mtd. 2 Stage w/ motor

    Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-7M
    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    Learn More
    Add to Wish List Add to Compare
  2. Myers I2CIB-7MT Frame Mtd. 2 Stage w/ motor

    Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-7MT
    $10,660.00

    Myers I2C, I2CI and I2CB Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head / pressure water pumps (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bro...

    7.5HP TEFC 230/460v Learn More
    Add to Wish List Add to Compare
  3. MP 31383-75-5 316 stainless steel centrifugal 7.5HP

    MP Pumps

    316 stainless steel centrifugal 7.5HP

    31383-7
    $4,670.60
    Chemical pump Chemflo 5, 7.5HP 575v316 Stainless steel Centrifugal Pump
    575v Learn More
    Add to Wish List Add to Compare
  4. ebara stainless steel A3U centrifugal pump

    EBARA Pumps

    SS Pump 7.5HP ODP

    A3U-32-20075D1G
    $3,791.17
    The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built ...
    7 1/2HP 230V ODP Learn More
    Add to Wish List Add to Compare
  5. Finish Thompson KC22PCVNO601807 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson KC22 Pump

    KC22PCVNO601807
    $6,985.40
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    7-1/2HP 230/460v Learn More
    Add to Wish List Add to Compare
  6. Finish Thompson KC22PCVNO601812 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Explosion Proof Magnetic Pump

    KC22PCVNO601812
    $7,817.71
    Explosion Proof FTI pump and motor. Hazardous duty sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over tra...

    7-1/2HP EXPlosion Proof 230/460v Learn More
    Add to Wish List Add to Compare
  7. Finish Thompson KC22PCVNO602116 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22PCVNO602116
    $7,087.58
    Chem duty Finish Thompson Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic...

    7-1/2HP 230/460v ChemDuty Learn More
    Add to Wish List Add to Compare
  8. Finish Thompson KC22PCVNO602118 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22PCVNO602118
    $6,583.66
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    7-1/2HP 230/460v Learn More
    Add to Wish List Add to Compare
  9. Finish Thompson KC22VCVNO601807 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    FTI Kynar Magnetic Pump

    KC22VCVNO601807
    $9,217.76
    FTI Kynar Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pumps incl...

    7-1/2HP 230/460v Kynar PVDF Learn More
    Add to Wish List Add to Compare
  10. Finish Thompson KC22VCVNO601812 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22VCVNO601812
    $7,119.86
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pu...

    Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 42

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Horse Power (HP) 7 1/2 Remove This Item
  2. inlet size 2" Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 27 items
  2. Magnetic Coupled (Seal-less) Pumps 15 items
Phase (Ø)
  1. Single (1) 4 items
  2. Three (3) 38 items
Voltage (Range)
  1. 220-240/460-480 21 items
  2. 220-240 5 items
  3. 208-240/460 8 items
  4. 460-480 6 items
PRICE $
$  -  $
Motor
  1. ChemDuty 5 items
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 4 items
  3. EXP (C 1, Gp D) 1 item
  4. ODP 8 items
  5. TEFC 24 items