Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
Sprinkler High Pressure Pump
DSS4HG-01
Sprinkler pump Irrigation pump High pressure pump.The Starite DSS4HG Self-Priming Pump consistently delivers high pressure performance without priming problems and delays. 4-stage sprinkler pump. Designed for minimal electrical consumption and...
2hp 230V/1 Learn More -
Sta-Rite
2HP Sprinkler Pump
DMG-41L
Sta-rite Medium Head Self-priming centrifugal pump for sprinkler irrigation, fire protection, marine and liquid transfer. Cast iron construction with Bronze enclosed impeller. Includes drain port. Order suction port separately as a accessory.230v Learn More -
Sta-Rite
J Centrifugal Pump Med Head 2HP
JMG-41L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
230v/1 Learn More