My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 236

Set Descending Direction
per page
Page
  1. 316SS March 7 Pump Air motor

    March Pumps

    316SS March 7 Pump Air Moror

    TE-7S-MD-Air
    $4,495.50
    316SS March Series 7 magdrive pump with AIR motor / pneumatic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXPlosion proof req...
    Air motor Learn More
    Add to Wish List Add to Compare
  2. Finish Thompson - DB6V-M538: FTI DB6 Explosion Proof pump

    Finish Thompson Pumps (FTI)

    FTI DB6 Magnetic pump

    DB6V-M538-1
    $3,215.24

    FTI DB6 Magnetic pump, PolyPro for chemicals / solvents

    DB Series hazardous duty magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics t...

    1/3hp 115/230v PP Learn More
    Add to Wish List Add to Compare
  3. March te-7r 3/4hp pump

    March Pumps

    March Magdrive Pump Ryton

    TE-7R-MD 1PH 3/4HP
    $1,288.13

    March Ryton Series 7 magnetic Pump.

    Magdrive / sealless pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, an...

    #7 Pump 115/230v 3/4HP Learn More
    Add to Wish List Add to Compare
  4. March 0155-0165-0100 TE-7R-MD Wet End Kit Parts

    March Pumps

    TE-7R-MD Wet End Kit Parts

    0155-0165-0100
    $549.00
    March 7R pump parts, repair kit, Wet End. Parts can be bought individually or in complete Wet End Kits. Ryton wet end kit. Magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet...
    March 7R Pump repair kit parts Learn More
    Add to Wish List Add to Compare
  5. march pump 316SS Magdrive Pump te-7s-md

    March Pumps

    316SS March 7 Magdrive Pump

    TE-7S-MD 1PH 1HP
    $3,228.75

    316SS March Series 7 magdrive pump.

    Magnetic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXP requirements.

    • Applications:
        ...
    115/230v TEFC Learn More
    Add to Wish List Add to Compare
  6. March te-7r pump magnetic drive

    March Pumps

    March Ryton Magdrive Pump

    TE-7R-MD 3PH 3/4HP
    $1,285.88

    March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the m...

    3/4HP 230/460v Learn More
    Add to Wish List Add to Compare
  7. March TE-7K-MD-3P-1hp Kynar Magdrive Pump

    March Pumps

    Kynar Magdrive Pump

    TE-7K-MD 3PH 1HP
    $2,027.25

    March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...

    230/460v 1HP Kynar Learn More
    Add to Wish List Add to Compare
  8. March TE-7K-MD March Pump

    March Pumps

    Chemical March Pump

    TE-7K-MD 3PH 3/4HP
    $1,884.38

    Chemical Kynar Pump. March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Kynar PVDF molded parts. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contac...

    230/460v 3/4HP Kynar Learn More
    Add to Wish List Add to Compare
  9. March TE-7.5K-MD-3ph Magnetic Kynar Pump

    March Pumps

    Magnetic Kynar Pump

    TE-7.5K-MD 3PH 2HP
    $4,077.00

    March Magnetic Series 7.5 Kynar pump. 

    TE-7.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems.  It is capable of generating a maxim...

    230/460v Learn More
    Add to Wish List Add to Compare
  10. March TE-7.5P-MD-3ph Magnetic pump Magnetic Pump

    March Pumps

    Magnetic Pump

    TE-7.5P-MD 3PH 2HP
    $2,866.50

    SALE March Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of glass filled Polypro. This makes them ideal for corrosive chemical applications. Chemical pumps for industrial process applicatio...

    230/460v 2HP PolyPro Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 236

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Chemical Processing Pumps Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 96 items
  2. Three (3) 99 items
Voltage (Range)
  1. 110-120 53 items
  2. 208-230/460//190-220/380-415 9 items
  3. 220-240/460-480 76 items
  4. 110-120/220-240 40 items
  5. 220-240 16 items
  6. 208-240/460 12 items
  7. 460-480 6 items
  8. 12/24/36 VDC 2 items
Horse Power (HP)
  1. 1/4 3 items
  2. 1/3 2 items
  3. 1/2 19 items
  4. 2/3 1 item
  5. 3/4 21 items
  6. 1 19 items
  7. 1 1/2 5 items
  8. 2 9 items
  9. 3 20 items
  10. 5 20 items
  11. 7 1/2 20 items
  12. 10 6 items
  13. 20 2 items
inlet size
  1. Less than 1in 53 items
  2. 1in 40 items
  3. 1 ½" 35 items
  4. 2in 58 items
  5. 3" 8 items
PRICE $
$  -  $
Manufacturer
  1. Finish Thompson Pumps (FTI) 88 items
  2. Little Giant Pumps 29 items
  3. March Pumps 93 items
  4. Oberdorfer Pumps 8 items
  5. Serfilco 18 items
Motor
  1. Air-Pneumatic 5 items
  2. ChemDuty 14 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 25 items
  4. EXP (C 1, Gp C/D) 5 items
  5. Hermetically Sealed 10 items
  6. ODP 15 items
  7. Open 30 items
  8. TEFC 115 items