My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 20

Set Descending Direction
per page
Page
  1. Finish Thompson UC326AECSSVF4622131 ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    UC326AECSSVF4622131
    $11,529.90
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...
    7.5HP/3ph Learn More
    Add to Wish List Add to Compare
  2. Finish Thompson DB22P4-NS-M514 Magnetic Acid pump Hazardous Duty

    Finish Thompson Pumps (FTI)

    Magnetic Acid pump

    DB22P4-M237
    $6,283.28
    Magnetic Acid pump chemical Duty, close coupled to a TEFC motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Pol...
    Polypro 7.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson KC32VCV601804 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32VCV601804
    $11,457.38
    Finish Thompson Inc. Pump. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic ...

    Learn More
    Add to Wish List Add to Compare
  4. Finish Thompson KC22PCVNO601807 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson KC22 Pump

    KC22PCVNO601807
    $8,033.21
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    7-1/2HP 230/460v Learn More
    Add to Wish List Add to Compare
  5. Finish Thompson KC22PCVNO602116 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22PCVNO602116
    $8,150.72
    Chem duty Finish Thompson Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic...

    7-1/2HP 230/460v ChemDuty Learn More
    Add to Wish List Add to Compare
  6. Finish Thompson KC22PCVNO602118 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22PCVNO602118
    $7,571.21
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    7-1/2HP 230/460v Learn More
    Add to Wish List Add to Compare
  7. Finish Thompson KC22VCVNO601807 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    FTI Kynar Magnetic Pump

    KC22VCVNO601807
    $10,600.42
    FTI Kynar Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pumps incl...

    7-1/2HP 230/460v Kynar PVDF Learn More
    Add to Wish List Add to Compare
  8. Finish Thompson KC22VCVNO601812 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22VCVNO601812
    $8,187.84
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pu...

    Learn More
    Add to Wish List Add to Compare
  9. Finish Thompson KC22VCVNO602116 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22VCVNO602116
    $8,169.92
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pu...

    Learn More
    Add to Wish List Add to Compare
  10. Finish Thompson KC22VCVNO602118 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Kynar Magnetic Pump

    KC22VCVNO602118
    $10,138.42
    Kynar pump by Finish Thompson. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ce...

    7-1/2HP 230/460v Kynar Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 20

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Chemical Processing Pumps Remove This Item
  2. Horse Power (HP) 7 1/2 Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Three (3) 20 items
Voltage (Range)
  1. 220-240/460-480 11 items
  2. 208-240/460 3 items
  3. 460-480 6 items
inlet size
  1. 2in 14 items
  2. 3" 3 items
PRICE $
$  -  $
Manufacturer
  1. Finish Thompson Pumps (FTI) 20 items
Motor
  1. ChemDuty 4 items
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 3 items
  3. EXP (C 1, Gp C/D) 2 items
  4. TEFC 11 items