My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 104

Set Descending Direction
per page
Page
  1. Finish Thompson DB10V-M207 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10V-M207
    $1,854.65
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • PVDF construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation with IEC m...
    1.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  2. March te-7r pump magnetic drive

    March Pumps

    March Ryton Magdrive Pump

    TE-7R-MD 3PH 3/4HP
    $1,285.88

    March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the m...

    3/4HP 230/460v Learn More
    Add to Wish List Add to Compare
  3. March TE-7K-MD-3P-1hp Kynar Magdrive Pump

    March Pumps

    Kynar Magdrive Pump

    TE-7K-MD 3PH 1HP
    $2,027.25

    March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...

    230/460v 1HP Kynar Learn More
    Add to Wish List Add to Compare
  4. March TE-7K-MD March Pump

    March Pumps

    Chemical March Pump

    TE-7K-MD 3PH 3/4HP
    $1,884.38

    Chemical Kynar Pump. March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Kynar PVDF molded parts. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contac...

    230/460v 3/4HP Kynar Learn More
    Add to Wish List Add to Compare
  5. March TE-7.5K-MD-3ph Magnetic Kynar Pump

    March Pumps

    Magnetic Kynar Pump

    TE-7.5K-MD 3PH 2HP
    $4,077.00

    March Magnetic Series 7.5 Kynar pump. 

    TE-7.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems.  It is capable of generating a maxim...

    230/460v Learn More
    Add to Wish List Add to Compare
  6. March TE-7.5P-MD-3ph Magnetic pump Magnetic Pump

    March Pumps

    Magnetic Pump

    TE-7.5P-MD 3PH 2HP
    $2,866.50

    SALE March Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of glass filled Polypro. This makes them ideal for corrosive chemical applications. Chemical pumps for industrial process applicatio...

    230/460v 2HP PolyPro Learn More
    Add to Wish List Add to Compare
  7. Finish Thompson DB11P-M215 FTI Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    FTI Magnetic coupled pump

    DB11P-M215
    $2,899.09
    FTI Magnetic coupled pump DB11 close coupled to a 2HP TEFC motor.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled de...
    2HP 230/460v Polypro Learn More
    Add to Wish List Add to Compare
  8. Finish Thompson DB11P-M207 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB11P-M207
    $2,879.89
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1-1/2HP 230/460v Learn More
    Add to Wish List Add to Compare
  9. fti_db7.jpg

    Finish Thompson Pumps (FTI)

    FTI DB6 pump

    DB6HP-M227
    $1,523.75

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...

    1/2HP 230/460v PolyPro Learn More
    Add to Wish List Add to Compare
  10. Finish Thompson DB10P-M207 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10P-M207
    $1,634.50
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1.5HP 230/460v Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 104

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Magnetic Coupled (Seal-less) Pumps Remove This Item
  2. Phase (Ø) Three (3) Remove This Item
Clear All
Shopping Options
Category
  1. ANSI Pumps 8 items
  2. Back Pullout 21 items
  3. Center Line Discharge 9 items
  4. Chemical Processing Pumps 99 items
  5. Corrosion Resistant Plastic 52 items
  6. Dry Running Pumps 17 items
  7. Metal Alloy Pumps 4 items
  8. Non-Metallic Pumps 50 items
  9. Self Priming Pumps 6 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 8 items
  3. 220-240/460-480 75 items
  4. 208-240/460 11 items
  5. 460-480 6 items
Horse Power (HP)
  1. 1/2 5 items
  2. 3/4 10 items
  3. 1 9 items
  4. 1 1/2 3 items
  5. 2 7 items
  6. 3 20 items
  7. 5 21 items
  8. 7 1/2 20 items
  9. 10 6 items
  10. 20 2 items
inlet size
  1. 1in 5 items
  2. 1 ½" 23 items
  3. 2in 52 items
  4. 3" 8 items
PRICE $
$  -  $
Manufacturer
  1. Finish Thompson Pumps (FTI) 74 items
  2. Little Giant Pumps 2 items
  3. March Pumps 20 items
  4. Serfilco 8 items
Motor
  1. ChemDuty 13 items
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 12 items
  3. EXP (C 1, Gp C/D) 5 items
  4. TEFC 74 items