Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
FTI DB11 Magnetic coupled pump
DB11P-M216
$2,520.95Magnetic coupled pump.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation...
2HP 115/230v PolyPro Learn More -
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8P-M226
$1,145.28Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...1/2HP 115/230v Learn More -
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8V-M226
$1,443.56FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...1/2HP 115/230v TEFC Kynar Learn More -
Finish Thompson Pumps (FTI)
FTI DB6 pump
DB6HP-M227
$1,325.00Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...
1/2HP 230/460v PolyPro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB10P-M207
$1,421.30Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1.5HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor
UC1516AECCSVF4121409
$8,100.00Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli... -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor
UC326AECSSVF4622131
$10,026.00Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...7.5HP/3ph Learn More -
Serfilco
1-1/2x1MPGR-D.75
44-0581C
$1,173.79Centrifugal Horizontal Magnetic Coupled Pump .75 HpCentrifugal Horizontal Magnetic Coupled Pump .75 Hp Series D magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch ...3/4HP 190/380 // 230/460V TEFC Learn More -
March Pumps
magdrive pump Ryton March 6
TE-6T-MD 1PH 1/2HP
15% Off Special Price $939.25 Regular Price $1,105.00Magdrive pump March 6, Ryton
Centrifugal Horizontal Magnetic Coupled Pump .5 Hp. TE-6T-MD-1P-1/2HP Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide ov...
115/230v 1/2HP Ryton Learn More -
March Pumps
Kynar PVDF PUMP 5.5
TE-5.5K-MD 1PH 1/3HP
15% Off Special Price $935.00 Regular Price $1,100.00Kynar March Pump. Involute design w/closed PVDF impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 2.937 impeller. This pump has Kynar plastic construction & can handle strong halogen solutions & certain chronic or sulfuric aci...
115/230v TEFC PP Learn More
