My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 21-30 of 68

Set Descending Direction
per page
Page
  1. March TE-5S-MD-AM Air Magnetic Pump EXP Air motor

    March Pumps

    Magnetic Pump EXP Air motor

    TE-5S-MD-AM (Air)
    $1,952.00

    316 Stainless Steel magnetic coupled pump. Magnetic Pump EXP Air motor. Pneumatic Motor is Gast brand. Stainless steel is often used for high liquid temperatures, solvents and chemicals not suitable for the engineering thermoplastics. Stainless St...

    Stainless pump w/ air motor Learn More
    Add to Wish List Add to Compare
  2. March TE-5.5C-MD-AC-1P PolyPro PUMP

    March Pumps

    PolyPro PUMP

    TE-5.5C-MD-AC 1PH
    $890.00
    March TE5.5 magnetic pump. Involute design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller . This pump has a A/C motor 50/60 HZ.

    Pump can be fitted with optional priming chamber to provide self-pr...

    115/230v ODP motor Learn More
    Add to Wish List Add to Compare
  3. march pump TE_6t

    March Pumps

    March Ryton magdrive 1/2 hp

    TE-6T-MD 3PH 1/2HP
    $1,026.00

    March Centrifugal Magnetic Coupled Pump .5 Hp. Magnetic pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The broad range of construction materials ...

    230/460v 1/2HP Ryton Learn More
    Add to Wish List Add to Compare
  4. MARCH_SERIES 5.5S pump

    March Pumps

    316 Stainless Magnetic Pump

    TE-5.5S-MD 1PH 1/3HP
    $2,798.00

    316 Stainless March pump, magdrive sealless.

    Involute design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller . This pump is a 316 stainless steel construction. Use in high temperature applications li...

    115/230v 1/3HP Learn More
    Add to Wish List Add to Compare
  5. March Explosion Proof TE-5C ryton PumpBiz

    March Pumps

    Magnetic pump EXP PPS

    TE-5C-MD RYTON EXP 1P
    $1,653.68

    All Ryton PPS magnetic coupled pump. Ryton is a engineering thermoplastic and is good for many chemicals, solvents, alcohol and hot liquids. Motor is EXP 115/230 single phase. March pumps are used in industry, sanitizing with alcohol and special a...

    Ryton Pump 115/230V Explosion Proof Learn More
    Add to Wish List Add to Compare
  6. March TE-6K-MD-1P 3.5 PVDF magdrive 1/2 hp

    March Pumps

    PVDF magdrive 1/2 hp

    TE-6K-MD 1PH 1/2HP
    $1,008.00

    PVDF Magdrive 1/2HP pump.

    March Centrifugal Horizontal Magdrive Pump .5 Hp. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The ...

    115/230v March series 6 Learn More
    Add to Wish List Add to Compare
  7. march_te-5.5s-md.jpg

    March Pumps

    316 Stainless PUMP

    TE-5.5S-MD 3PH 1/3HP
    $3,022.00
    316 Stainless PUMP, sealles magnetic coupled. Involute design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller . This pump is a 316 stainless steel construction. 0151-0002-0400

    this pump has a 3.187...

    230/460v 1/3HP Learn More
    Add to Wish List Add to Compare
  8. MARCH_SERIES 5 stainless steel

    March Pumps

    Stainless Magnetic Pump Explosion proof motor

    TE-5S-MD XP 1PH 1/4HP
    $2,990.00

    Stainless Magnetic Pump, Explosion Proof Motor.

    316 Stainless Steel magnetic coupled pump. Motor is Explosion Proof 115/230 single phase. Stainless steel is often used for high liquid temperatures, solvents and chemicals not suitable for engineer...

    115/230v Explosion Proof Learn More
    Add to Wish List Add to Compare
  9. March TE-6T-MD-1P XP Sealless pump EXPlosion proof

    March Pumps

    Sealless pump EXP

    TE-6T-MD XP 1PH 1HP
    $3,108.00

    Sealless pump Explosion Proof motor, Kynar

    Magnetic Coupled Pump for biodiesel production and other solvents. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to...

    115/230v Learn More
    Add to Wish List Add to Compare
  10. March_TE-5C-MD pump with air pneumatic motor

    March Pumps

    Magnetic pump PolyPro AIR motor

    TE-5C-MD-AM (Air)
    $905.00
    Polypro magnetic coupled pump. Motor is pneumatic air powered. 7CFM @ 60psi air max. req'd. Often used for solvents and chemicals.

    Click here for Explosion Proof SS Self Priming pump.

    EXPlosion Proof Pumps of all types.

    Pneumatic drive PP Pump Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 21-30 of 68

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Magnetic Coupled (Seal-less) Pumps Remove This Item
  2. inlet size 1" Remove This Item
Clear All
Shopping Options
Category
  1. Back Pullout 10 items
  2. Chemical Processing Pumps 67 items
  3. Corrosion Resistant Plastic 62 items
  4. Dry Running Pumps 3 items
  5. Metal Alloy Pumps 5 items
  6. Non-Metallic Pumps 51 items
  7. Submersible pumps 3 items
Phase (Ø)
  1. Single (1) 51 items
  2. Three (3) 9 items
Voltage (Range)
  1. 110-120 14 items
  2. 208-230/460//190-220/380-415 4 items
  3. 220-240/460-480 8 items
  4. 110-120/220-240 31 items
  5. 220-240 6 items
Horse Power (HP)
  1. 1/4 1 item
  2. 1/3 11 items
  3. 1/2 13 items
  4. 2/3 1 item
  5. 3/4 3 items
  6. 1 5 items
  7. 1 1/2 2 items
PRICE $
$  -  $
Motor
  1. Air-Pneumatic 5 items
  2. ChemDuty 2 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 12 items
  4. EXP (C 1, Gp C/D) 3 items
  5. Hermetically Sealed 3 items
  6. ODP 5 items
  7. Open 7 items
  8. TEFC 29 items