Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
March Pumps
Kynar Magdrive Pump
TE-7K-MD 3PH 1HP
15% Off Special Price $1,311.55 Regular Price $1,543.00March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...
230/460v 1HP Kynar Learn More -
March Pumps
Chemical March Pump
TE-7K-MD 3PH 3/4HP
15% Off Special Price $1,216.35 Regular Price $1,431.00Chemical Kynar Pump. March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Kynar PVDF molded parts. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contac...
230/460v 3/4HP Kynar Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB10P-M207
$1,421.30Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1.5HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor
UC1516AECCSVF4121409
$8,100.00Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli... -
March Pumps
Self prime magnetic pump
SP-TE-7P-MD 3PH 1HP
15% Off Special Price $1,599.70 Regular Price $1,882.00March pump 7 self-priming magnetic magdrive pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors. old 0155-0187-0200- Applications:
- Computer Cooling ...
230/460v Learn More - Applications:
-
March Pumps
316SS Magdrive Pump
TE-7S-MD 3PH 1HP
15% Off Special Price $2,289.05 Regular Price $2,693.00Stainless March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors.- Applications:
- Rapid prototype clean station ...
1HP 230/460v Stainless Learn More - Applications:
-
Little Giant Pumps
TE-7-MD-CK
587603
$2,622.54The Little Giant MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute, magnet housing and impeller are carbon-filled Kynar for excellent chemical resistance. Ceramic shaft and thrust... -
Little Giant Pumps
TE-7-MD-HC
587040
$2,532.89The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use.Volute, magnet housing and impeller are glass-filled Ryton for excellent chemical resistance. Ceramic shaft and thrust w... -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 10hp motor
UC1516AECSSVF5872124
$8,431.00Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic radial t...10HP Learn More