My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 121-130 of 964

Set Descending Direction
per page
  1. Webtrol

    2hp Booster Pump

    G15B20

    $5,169.60

    2hp Booster Pump

    Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is def...

    2HP 115/230V ODP Learn More
  2. AMT Pumps

    MSV3 1 HP 6 stage pump

    MSV3-6-3P

    $1,428.00

    1HP Multistage Vertical booster pump, 5 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include...

    1HP 230/460v Learn More
  3. EBARA Pumps

    Ebara pump replacement shaft seal

    S1125008

    $337.00

    Ebara pump replacement shaft seal. Code "C" Viton

    Mechanical shaft seal for repair of A3U centrifugal pump. Fits JM shaft.

    The A3U Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty se...

    Viton shaft seal Learn More
  4. Webtrol

    SS Booster Pump

    M10B26 S16-3PHT

    $5,113.80
    Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is defined in the const...
    3HP 208-230/460V TEFC Learn More
  5. MP Pumps

    High Head Pedestal Bronze pump

    36623

    $13,826.29
    High Head Pedestal Bronze pump.

    Self priming high pressure centrifugal pump, pedestal mounted for pulley or belt drive on ship or boat.

    • 2 x 2" HIGH HEAD
    • ABS type approved for many shipboard services
    • FLOWS - TO 160 GPM
    • PRESSURES - TO 190 TD...
    10HP-3ph PED 6.5 Imp. HR"W/BASE" Learn More
  6. MP Pumps

    High Head Pedestal pump

    36647

    $2,995.75

    High Head Pedestal CI pump.

    Self priming high head centrifugal pump, pedestal mounted for pulley or belt drive on ship or boat.

    • 1 1/2 x 1 1/2" HIGH HEAD
    • ABS type approved for many shipboard services
    • FLOWS - TO 140 GPM
    • PRESSURES - TO 190 TDH...
    hhlf Learn More
  7. MP Pumps

    High Head pump Pumpak HHLF

    36085

    $2,430.68

    Self priming high head centrifugal pump, for close coupled to an electric motor supplied seperately. 

    • 1 1/2 x 1 1/2" HIGH HEAD
    • For “C” FACE ELECTRIC MOTOR DRIVE 184TC
    • FLOWS - TO 140 GPM
    • PRESSURES - TO 190 TDH
    • CAST IRON CONSTRUCTION
    • DRI...
    Electric motor pump kit Learn More
  8. MP Pumps

    Series 300

    26812

    $7,737.50
    Enclosed impellers are dynamically balanced to improve efficiency and bearing life. Standard carbon / ceramic / FKM mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
  9. AMT Pumps

    High Pressure Cast Iron Centrifugal Pump

    489F-95

    $1,028.50
    High pressure - head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water...

    1HP 3-Phase TEFC motor - OBSOLETE, call or email for alternative assistance. Parts still available.

    Learn More
  10. MP Pumps

    High Head Bronze pump & motor

    36086

    $11,000.21
    High Head Pedestal Bronze pump.

    Self priming high pressure centrifugal pump, motor drive on ship or boat.

    • 2 x 2" HIGH HEAD
    • ABS type approved for many shipboard services
    • FLOWS - TO 160 GPM
    • PRESSURES - TO 190 TDH
    • Bronze CONSTRUCTION
    • DRIV...
    5HP 230/460v Learn More
View as List Grid

Items 121-130 of 964

Set Descending Direction
per page