Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Webtrol
SS Booster Pump
M15B14 S16
$5,608.80Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is defined in the const...2HP 115/230V ODP Learn More -
Sta-Rite
Booster Pump
HP20G-02
2HP Water Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic com...2hp 115/230v 1" Learn More -
Webtrol
35GPM Cast Iron Booster Pump
G35B12
$2,009.00Booster pumps increase water pressure from city mains or private water systems. Especially important for proper operations of water softeners and filtration equipment. Units pump water from cisterns, tanks, or ponds, with suction lifts up to 10...2HP 115/230V ODP Learn More