Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
4901-95
$1,008.00High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...208-230/460v 3HP ODP Learn More -
AMT Pumps
High Pressure Bronze Centrifugal Pump
489F-97
$1,357.20High Head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure ...208-230/460v 1HP ODP Learn More -
American Stainless
SS pump & motor
C14622B2T3
$828.41Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...2HP 208-230/460V TEFC Learn More -
Sta-Rite
JB Centrifugal Pump High Head 1HP
JBHE3-63S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Sta-Rite
JB Centrifugal Pump High Head 2-1/2HP
JBHHG3-53S
This pump has a heavy-duty cast iron construction with silicon bronze impeller. Discontinued due to DOE efficiency standards of small pumps.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for ea...
-
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC3-56S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
489F-95
$768.00High pressure - head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water...1HP 3-Phase TEFC motor Learn More -
MP Pumps
High Head Bronze pump & motor
36086
$7,020.00High Head Pedestal Bronze pump.Self priming high pressure centrifugal pump, motor drive on ship or boat.
- 2 x 2" HIGH HEAD
- ABS type approved for many shipboard services
- FLOWS - TO 160 GPM
- PRESSURES - TO 190 TDH
- Bronze CONSTRUCTION
- DRIVE SLEEVE -...
5HP 230/460v Learn More -
MP Pumps
High Head Bronze pump & Motor
36194
$6,960.00High Head Pedestal Bronze pump.Self priming high head centrifugal pump, motor drive on ship or boat.HHL-FLOMAX “HR” high pressure self-primingpumps meet USCG specifications for auxiliaryfire control
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS type appro...
HHLF 7.5-3 184TC TEFC 6.7imp Learn More -
Hypro Pumps
316Stainless Steel pump 1HP
COMSV343T
$670.001HP 316 Stainless Steel investment cast end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer.
This series of low pressure general transfer pumps are also available in C...
230/460v/3 TEFC Learn More