Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2ZPLS Centrifugal Water Pump 20hp
B74492
BERKELEY Close-Coupled high head Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller without distur...230/460v/3 20HP 2-1/2"x2" Flange Learn More -
EBARA Pumps
SS 2stage 2hp
A2CDU70/206D3C
$1,911.32Ebara 2HP High head pump A2CDU70/206D3C, 304 Stainless Steel SS. 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. Booster pump 2 HP, 3 phase ODP motor.*Note: Model ...
2HP 230/460V ODP Learn More -
Berkeley Pumps
B2-1/2TPMS Berkeley Water Pump
B75980
Berkley centrifugal pump, End suction centrifugal pump, close coupled with mechanical seal and Flanged connections. Used for irrigation, fire sprinkler, boosting and general commercial water applications. 125# flat face flanges.BERKELEY Close...
10HP 3 phase ODP Learn More -
Berkeley Pumps
B1WP Centrifugal Water Pump
B55569S
Berkeley water pump. End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Packed pump.5HP 3600/60/3 ODP SILICON BRONZE Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54605
7.5HP Berkeley End suction centrifugal water pump,
close coupled with mechanical seal. Used for irrigation, fountains, spa, pools and other water transfer applications.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications req...
230/460 7-1/2HP Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54606
10HP End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains, spa, pools, commercial dishwashers lvo and other water transfer applications.230/460 10HP Learn More -
Berkeley Pumps
B3TPMS Centrifugal Water Pump 7.5HP/3ph
B74757
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool, commercial dishwasher lvo and other water transfer applications.7.5hp Learn More -
Berkeley Pumps
Centrifugal Water Pump
B58088
End suction centrifugal pump, close coupled with mechanical seal.10HP 230/460V ODP Learn More -
EBARA Pumps
Stainless Steel Centrifugal Pump
ACDU120/530D3C
$1,626.00The Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-last...
3HP 230/460V ODP Learn More -
American Stainless
Close coupled pump/mtr 1.5 HP 3ph
C15418BED3
$637.15Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...1 1/2HP 230/460V ODP Learn More