Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B70224
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.25HP 230/460v/3 ODP Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54118
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.15HP 230/460v/3 ODP Learn More -
MP Pumps
High Head Pump & Motor HHLF
36301
$3,570.00Self priming high head centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS Type approved for shipboard services. 46 CFR Compliant Auxiliary Fire Control. HHL-FLOMAX “HR” high pressure self-priming pumps meet USCG...
7.5HP 230/460v USCG Learn More -
Berkeley Pumps
B1-1/2ZPH (15HP - Three Phase - CI)
B53759
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v packed Learn More -
Berkeley Pumps
B2-1/2TPMS Centrifugal Water Pump
B54572
B2-1/2TPMS Centrifugal Water Pump B54572.
Centrifugal water pump by Berkeley. Heavy duty, cast iron End suction centrifugal pump, close coupled to a electric motor with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most...
7.5HP 230/460v Learn More -
Berkeley Pumps
B1-1/2TPL Berkeley Water Pump
B53749
Berkeley pump. End suction centrifugal pump, close coupled with Packing. Water pump for irrigation, water transfer, industrial applications. Use Berkeley pump on your chiller, water booster pump, fish hatchery, building fire sprinkler system.5HP 230/460v Learn More -
Berkeley Pumps
B1-1/2ZPL (15HP - Three Phase - CI)
B53753
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v PACKING Learn More -
Berkeley Pumps
B1-1/2ZPL (10HP - Three Phase - CI)
B53752
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All centrifugal pumps offer back pull-out design
- Impeller size is trimmed
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
10HP 230/460V ODP PACKING Learn More -
Berkeley Pumps
B3EPBLS Centrifugal Water Pump
B58059
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation and other water transfer applictions.50HP/3ph Learn More -
Berkeley Pumps
B1-1/2TPMS High Pressure Water Pump
B58086
High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...7.5HP 230/460V ODP Learn More