Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
SS pump & motor
C14325BET3
$820.80Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...1 1/2HP 230/460V TEFC Learn More -
American Stainless
SS pump & motor
C24324BET3
$940.19Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...1 1/2HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 1.5 hp motor.
S14333BET3
$813.51Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...1 1/2HP 230/460V TEFC Learn More -
Serfilco
H2X1.5KE1V(M8)-D1.5
42-0318A
$3,389.39PVDF/KYNAR Centrifugal Horizontal Mechanical Sealed Pump 1.5 Hp Series “HE” Horizontal Pumps feature “total” chemical resistance with non-metalic construction of all wetted components. The molded, enclosed impellers are designed to provide maximu...1 1/2HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC150R-3PH-T
$2,943.39- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V TEFC Learn More -
MP Pumps
Series 110 w/ motor
24994
$1,750.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3450 RPM.1-1/2HP 230/460v Learn More -
AMT Pumps
Sprinkler Booster Pump 1.5HP
379J-95
$1,020.00AMT Sprinkler/Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check valve to in...
230/460v TEFC Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
489B-95
$834.00High Pressure / High Head Centrifugal Pumps. OBS see alternates. Parts are available. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office...230/460v 1-1/2HP TEFC Learn More -
AMT Pumps
High Head SS Straight Centrifugal Pump
553B-98
23% Off Special Price $769.23 Regular Price $999.00High Head SS pump, 1.5HP 3-phase
The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circu...
1-1/2HP 230/460 Learn More -
AMT Pumps
AMT Self Priming Centrifugal Pump
285K-95
25% Off Special Price $705.00 Regular Price $940.00AMT 1.5HP Self-priming Cast Iron pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient p...1.5HP 230/460v/3 TEFC Learn More