Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
5HP Irrigation Pump High Head
DHJ-170
5hp Irrigation Pump
Irrigation Pump, High Head Self-priming centrifugal pump for irrigation, fire protection, marine and liquid transfer. Cast iron construction with Bronze enclosed impeller. Includes drain port.
USCG auxiliary fire pump 80GPM @...
5HP 230v/1 Learn More -
Sta-Rite
5HP Sprinkler Pump Medium Head
DMJ-172
5HP Sta-rite Medium Head Self-priming centrifugal pump, electric
for sprinkler irrigation, fire protection, marine and liquid transfer. Cast iron construction with Bronze enclosed impeller. Includes drain port. Order suction port separately as a ...
230v/1 5HP Learn More