Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Pedrollo Pumps
Centrifugal End Suction pump
CPH50C16S High Head
$4,010.09High pressure centrifugal water pump with electric motor. Good for wash down, irrigation, booster, chiller. Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive ...5HP 230v/1 Learn More -
Pedrollo Pumps
Liquid Turbine pump
PQ05H36S
$649.15Liquid Turbine pump. Peripheral pump with cast iron body.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY...
1/2HP 230v/460 Learn More -
MP Pumps
High Head Pump & Motor HHLF
36438
$5,675.00High head self priming centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- FLOWS - TO 140 GPM
- PRESSURES - TO 190 TDH
- CAST IRON CONSTRUCTION
- DRIVE SLEEVE - 304 STAINLESS STEEL
- Close Coupled Motor
- SEALS - STANDARD...
5HP 230v/1ph Learn More -
Berkeley Pumps
B1-1/2ZPLS
B54504
$8,002.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v Seal Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CP07H36S
$817.86Pedrollo centrifugal pump for clean water . BOOSTER PUMP.They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY U...3/4HP 230/460v Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
PNGA07H36S
$2,379.67Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...3/4HP 230/460v Learn More -
Pedrollo Pumps
Multi-stage water pump
PJ5015C16S
$1,497.54Sprinkler pump. Electric Water for sprinkler or irrigation duty. Self priming to 25FT. RELIABILITY AND LOW POWER CONSUMPTION MAKES THEM Ideal for rainwater recover systems. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROL... -
Pedrollo Pumps
Turbine pump 1HP
PQ10C16S
$1,364.17Turbine pump.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOMY. THEY ARE SUIT...
230v/1 Learn More -
Pedrollo Pumps
Turbine pump 3/4HP
PQ07A16S
$1,282.32Turbine pump.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOMY. THEY ARE SUIT...
115v/1 Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
PNGA07A16S
$2,247.91Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...3/4HP 115v Learn More
