Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Griswold Pumps
CI SP pump 15HP
15HHT TEFC
$9,424.00Self-priming high flow & high-head pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
15HP 230/460v Learn More -
Griswold Pumps
CI SP pump 20HP
20HHT TEFC
$9,735.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.20HP 230/460v TEFC 4" Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT TEFC
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CP20H36S
$781.77Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMEST...2HP 230/460v/3 Learn More -
MP Pumps
High Head Pump & Motor HHLF
36301
$3,570.00Self priming high head centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS Type approved for shipboard services. 46 CFR Compliant Auxiliary Fire Control. HHL-FLOMAX “HR” high pressure self-priming pumps meet USCG...
7.5HP 230/460v USCG Learn More -
Pedrollo Pumps
Liquid Turbine pump
PQ05H36S
$416.12Liquid Turbine pump. Peripheral pump with cast iron body.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY...
1/2HP 230v/460 Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CP07H36S
$524.27Pedrollo centrifugal pump for clean water . BOOSTER PUMP.They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY U...3/4HP 230/460v Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
PNGA07H36S
$1,525.43Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...3/4HP 230/460v Learn More -
MP Pumps
Series 200 pump
22737
$2,970.00Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizontal. ...5HP 230/460v Learn More -
MP Pumps
Series 200 pump
35804
$5,634.20Bronze Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizonta...7.5HP 230/460v Learn More